SDS

ManualsBrandsHercules ManualsPlumbing Product1/2 gal. Furnace/Stove Cement

SAFETY DATA SHEET

1. Identification

Hercules High Hear Furnace CementProduct identifier

Other means of identification

7330E

Product code

Part Numbers: Regular- 35503, 35504, 35509, 35515, 35610, Heavy- 35521, 35526

Synonyms

Furnace Cement

Recommended use

Workers (and your customers or users in the case of resale) should be informed of the potential

presence of respirable dust and respirable crystalline silica as well as their potential hazards.

Appropriate training in the proper use and handling of this material should be provided as required

under applicable regulations.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Company Name

HCC Holdings, Inc. an Oatey Affiliate

Address

4700 West 160th Street

Cleveland, OH 44135

Telephone

216-267-7100

E-mail

info@oatey.com

Transport Emergency

Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)

Emergency First Aid

1-877-740-5015

Contact person

MSDS Coordinator

2. Hazard(s) identification

Not classified.

Physical hazards

Category 1Skin corrosion/irritation

Health hazards

Category 1Serious eye damage/eye irritation

Not classified.

OSHA defined hazards

Label elements

Signal word

Danger

Hazard statement

Causes severe skin burns and eye damage.

Precautionary statement

Prevention

Do not breathe mist or vapor. Wash thoroughly after handling. Wear protective gloves/protective

clothing/eye protection/face protection.

Response

If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all

contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and

keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison

center/doctor. Wash contaminated clothing before reuse.

Storage

Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazard(s) not otherwise

classified (HNOC)

Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis.

3. Composition/information on ingredients

Mixtures

Hercules High Hear Furnace Cement SDS US

925123 Version #: 01 Revision date: - Issue date: 22-April-2015

1 / 7

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier Hercules High Hear Furnace Cement Other means of identification Product code 7330E Synonyms Part Numbers: Regular- 35503, 35504, 35509, 35515, 35610, Heavy- 35521, 35526 Recommended use Furnace Cement Recommended restrictions Workers (and your customers or users in the case of resale) should be informed of the potential presence of respirable dust and respirable crystalline silica as well as their potential hazards.
PAGE 2
Chemical name CAS number % Kaolin 1332-58-7 10-30 Nepheline Syenite 37244-96-5 10-30 Sodium silicate 1344-09-8 10-30 Mica 12001-26-2 5-10 Wollastonite 13983-17-0 5-10 Crystalline silica (Quartz) 14808-60-7 1-5 Microspheres 68131-74-8 0-3 Other components below reportable levels 24.12 *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Inhalation Move to fresh air.
PAGE 3
Methods and materials for containment and cleaning up Large Spills: Stop the flow of material, if this is without risk. Use water spray to reduce vapors or divert vapor cloud drift. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece).
PAGE 4
General hygiene considerations Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 9. Physical and chemical properties Appearance Physical state Liquid. Form Paste. Color Tan. or Black. Odor Odorless. Odor threshold Not available. pH 11 - 13 Melting point/freezing point Not available.
PAGE 5
Ingestion Symptoms related to the physical, chemical and toxicological characteristics Causes digestive tract burns. Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. Information on toxicological effects Acute toxicity Not available. Skin corrosion/irritation Causes severe skin burns and eye damage.
PAGE 6
14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. Not established. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. One or more components are not listed on TSCA. TSCA Section 12(b) Export Notification (40 CFR 707, Subpt.
PAGE 7
US. California Proposition 65 WARNING: This product contains a chemical known to the State of California to cause cancer.