Product Overview

Spec Sheet #S00105/106
August 2003
furnace cement
Furnace/Stove Cement
A ready to use, premixed, air setting, high temperature refractory and retort cement for
mortar facing, caulking or coating. Exclusive* Clean ‘n Friendly
TM
formulation of high
purity ingredients provides a dependable cement containing no oils, no asbestos, no
silicon dioxide. Smoother consistency provides for an easy application. Use to seal and
repair boilers, furnaces, fireboxes, flue pipes, stoves, ducts, kilns, chimneys, combustion
chambers, and many other furnace and refractory applications. Patented formula meets
or exceeds OSHA requirement for minimal silica content.
Furnace cement can be used on oil, gas, coal, and woodburning heating
systems. Adheres to most building materials and when cured makes positive non-porous,
fireproof, acid proof seals that will not shrink, crack or crumble. Freeze point below +10°F
for uncured material.
Product is available in Regular Body, non-runny, tan colored cement and Heavy Body
firmer consistency, dark gray cement.
*Patent 6,506,247
STOCK NO. SIZE PACKING WEIGHT/CASE
Regular Body
35509* 11 oz. 12 18.0 lbs.
35503 1/2 pt. 24 27.0 lbs.
35504 1 pt. 12 27.0 lbs.
35515 1/2 gal. 6 53.0 lbs.
35610** 1 gal. 4
†
65.0 lbs.
Heavy Body
35521 1/2 gal. 6 53.0 lbs.
35526 1 gal. 4
†
72.0 lbs.
*Cartridge
**Note: Hercules former product “for heat’s sake
TM
” has been replaced with furnace cement, Stock No. 35610.
†
Carton packing will change to 2 pack on/or about the 4th quarter of 2001.
SIZES AND PACKING
DESCRIPTION
furnace
cement