SDS

ManualsBrandsHercules ManualsPipe ThreadingClear Thread Cutting Oil - 1 Gallon

Hercules Clear Cutting Oil

SDS US

SDS #7355E Version #: 01 Revision date: Issue date: 12-May-2015

Page 1 of 6

SAFETY DATA SHEET

1. Identification

Product identifier Hercules Clear Cutting Oil

Other means of identification

Product code 7335E

Synonyms Part Numbers: 40110, 40115, 40120, 40125, 40140

Recommended use Thread Cutting Oil

Recommended restrictions None Known

Manufacturer/Importer/Supplier/Distributor information

Company Name HCC Holdings, Inc. an Oatey Affiliate

Address 4700 West 160th Street

Cleveland, OH 44135

Telephone 216-267-7100

E-mail info@oatey.com

Transport Emergency Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)

Emergency First Aid 1-877-740-5015

Contact person MSDS Coordinator

2. Hazard(s) identification

Physical hazards

Not Classified.

Health hazards

Not Classified

OSHA defined hazards

Not Classified.

Label elements

Hazard symbol

None.

Signal word

None

Hazard statement

This product does not require any hazard statements.

Precautionary statement

Prevention

This product does not require any precautionary statements.

Response

This product does not require any precautionary statements.

Storage

Not applicable.

Disposal

Not applicable.

Hazard(s) not otherwise

classified (HNOC)

Used Oil may contain harmful impurities.

3. Composition/information on ingredients

Mixtures

Chemical name

CAS number

Petroleum Hydrocarbon Mixture

Mixture

>95

4. First-aid measures

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical

attention if symptoms occur.

Skin contact

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get

medical attention if symptoms occur.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids.

Check for and remove any contact lenses. Get medical attention if irritation occurs.

Ingestion

Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable

for breathing. If material has been swallowed and the exposed person is conscious, give small

quantities of water to drink. Do not induce vomiting unless directed to do so by medical

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier Hercules Clear Cutting Oil Other means of identification Product code 7335E Synonyms Part Numbers: 40110, 40115, 40120, 40125, 40140 Recommended use Thread Cutting Oil Recommended restrictions None Known Manufacturer/Importer/Supplier/Distributor information HCC Holdings, Inc. an Oatey Affiliate 4700 West 160th Street Cleveland, OH 44135 216-267-7100 info@oatey.
PAGE 2
Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed. General information personnel. Get medical attention if symptoms occur. Ingestion may result in nausea, vomiting, and or diarrhea. Immediate medical attention is not required. Note to physician, treat symptomatically. 5.
PAGE 3
US. ACGIH Threshold Limit Values Components Type Value Oil Mist, Mineral TLV or PEL 5 mg/m3 Type Value US OSHA Permissible Exposure Limits Components Biological limit values Appropriate engineering controls Data Not available. No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants.
PAGE 4
Decomposition temperature Viscosity, kinematic Other information VOC (Weight %) Not available 27.5 – 33.5 mm2/s @ 40 °C < 1% by weight, < 10 g/L 10. Stability and reactivity Reactivity The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.. The product is stable. Under normal conditions of storage and use, hazardous reactions will not occur.
PAGE 5
Bio accumulative potential Mobility in soil Not Available. Liquid under most conditions. Floats on water. If it enters soil, it will adsorb to soil particles and will not be mobile. No known significant effects of critical hazards. Other adverse effects 13. Disposal considerations Disposal instructions The generation of waste should be avoided or minimized wherever possible.
PAGE 6
Clean Water Act This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61) This product does not contain any substances regulated as hazardous air pollutants (HAPS) under Section 112 of the Clean Air Act Amendments of 1990.