Technical Specifications

SUBMITTAL SHEET: Cutting Oil
1
SPECIFICATIONS:
Cutting Oil
HCC Holdings, Inc.
4700 West 160th Phone: [phone]
Cleveland, Ohio 44135 Website: www.Oatey.com
CUTTING OIL Date: August 2017
Oils and Lubricants
APPROVALS & LISTINGS
USDA Listed
SPECIFIC USES
Use Clear Cutting Oil for the cutting of clean, unbroken threads during manual or low rpm
threading machine operations. Also for hack sawing or light drilling. Use Dark Cutting Oil for high-
speed tapping/threading, broaching, turning or drilling applications.
Application specific lubricants for both manual and machine metal
working operations. Used for sawing, drilling, turning or thread cutting with all
types of metals. These are superior quality cutting oils formulated to produce
consistent results under all weather conditions. Hercules Cutting Oils contain
activated sulfur to provide anti-weld properties, reduce friction and prevent
excessive heat generation, thus minimizing material expansion resulting in ill-
fitting joints. The high film strength of Hercules Cutting Oils maintains a continuous
contact of the lubricant with the work assuring quick, accurate and high quality
cuts with minimal tool wear. Lubricants contain no nitrosamine forming
compounds or chlorinated oils.
Clear Cutting Oil
A blend of high quality mineral oils with sulfur base. Used for cutting
clean, unbroken threads during manual or low rpm threading machine
operations on small sizes of steel and brass pipe. Also applicable for hacksawing
and light drilling. Will not stain copper or brass materials.
Dark Cutting Oil
Extra heavy blend of high quality mineral oils with sulfur-lard base.
Compounded to keep tooling and work cool when used on high speed
threading machines. Enables operators to cut clean, sharp threads on steel or
brass pipe. Ideal for thread cutting, tapping, broaching, drilling or any
application where high speeds and quality finishes are required. A superior
quality product that significantly extends tool life and reduces labor time.