OSHA Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET #
Hercules Dark Cutting Oil
Date Prepared:
6/25/1990
Last Reviewed:
12/17/2001
Hercules Chemical Company Inc.
111 South Street
Passaic NJ 07055
Phone [phone]
Fax [phone]
Section 1
44
This Material Safety Data Sheet (MSDS) was requested moments ago
from Hercules Automated Fax Information System. Please forward it
immediately to the person in charge of MSDS's, or retain it at the
machine until claimed.
OSHA-Required Health And Safety Information!
Meets OSHA 29 CFR 1910.1200
5 mg/M³ 5 mg/M³ (as oil N/A
--
Petroleum-based lubricating oils (64742-53-6)
5 mg/M³ 5 mg/M³ N/A
--
HMIS Hazard Rating:
1 1 0 A
465-900º F
Specific Gravity
(H2O = 1):
At 25º C .906
Vapor Density
(Air = 1):
> 8
Melting Point (° F)
N/A
Evaporation Rate:
(Butyl Acetate = 1)
< 1.0
Solubility in Water:
Insoluble
Dark Brownish Amber Liquid Odor:
Petroleum odor
Flash Point:
320º F (COC)
Flammable Limits:
N/A
LEL:
1%
UEL:
6%
Extinguishing Media:
Dry chemical, CO2, Foam. Use water to keep fire-exposed containers cool.
Special Firefighting Procedures:
Recommend supplied air breathing gear when fire fighting in confined spaces. Minimize breathing gases, vapor,
fumes, or decomposition products. Water froth may be used to flush spills away from exposure
Unusual Fire And Explosion Hazards:
None
Section 2 - Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical Identity;
Common Name(s), CAS Numbers)
Upper Bound
Limit if SARA
Reportable
Petroleum-based lubricating oils (64742-52-5)
Section 3 - Physical/Chemical Characteristics
Boiling Point (°C): Vapor Pressure
(mm Hg):
At 38º C (100ºF) < 0.1
Appearance And Color:
Section 4 - Fire And Explosion Hazard Data
OSHA PEL ACGIH TLV Other Limits
Continued on Next Page