Technical Specifications

300 DEGREE
PlumbersGrease
Valve Stem Grease
SPEC SHEET #S00039
Hercules Chemical Company, Inc.
111 South Street, Passaic, NJ 07055-9100
Phone: [phone] • Fax: [phone]
e-mail: [e-mail]
http://www.herchem.com
©2002 HCCI WRA
APPROVALS AND LISTINGS
SPECIFIC USES
For Delivery by Fax Call 1-800-942-4636
Internet See MSDS section of
www.herchem.com
Mail Contact Hercules at address below or
any Hercules representative
SPECIFIC APPLICATIONS*
300 Degree Plumbers Grease can be used as a lubricant
on sliding or rotating metal parts in steam and hot/cold water
systems.
PHYSICAL PROPERTIES
Appearance/color/odor: Smooth translucent amber grease.
Odorless.
WARNINGS OR CAUTIONS
• Read all cautions and directions carefully before using this
product.
•
KEEP OUT OF REACH OF CHILDREN.
• If Plumbers Grease is dropped on floor wipe up to prevent
slippery footing.
DIRECTIONS FOR USE
Valve Bodies: Unscrew valve bonnet nut. Rotate valve stem
counter clockwise to remove from valve body. Clean stem
and threads if necessary. Apply a liberal amount of
300 Degree Plumbers Grease to the stem and stem
threads. Reassemble in reverse order. Tighten bonnet nut
lightly. Retighten if necessary to prevent seepage when
system pressure is restored.
Ballcock and Float Linkages: Clean and descale first if
necessary. Apply liberally to all rubbing and pivoting surfaces.
Apply a thin film to all metal parts in contact with water to
prevent corrosion and scale build up. Apply to float linkage
threads to prevent corrosion.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST
MATERIAL SAFETY DATA SHEET- Clear (MSDS) #39
HMIS Hazard Warning 0-0-0-A
INGREDIENTS CAS#
NJ-T.S.R. #31348300 5005P, 5003P
This product is not classified as hazardous in accordance with OSHA
29 CFR 1910.1200.
* For special applications which may not be covered on this or other
Hercules literature, please contact Hercules Technical Services
Department by phone at 1-800-221-9330 or send a fax to
1-800-333-3456.
Not Applicable.
Use
300 Degree Plumbers Grease to lubricate valve
stems, faucets and ballcocks.