Specification

megabubble
®
Leak Detector
SPEC SHEET #S00059
Hercules Chemical Company, Inc.
111 South Street, Passaic, NJ 07055-9100
Phone: [phone] • Fax: [phone]
e-mail: [e-mail]
http://www.herchem.com
©2005 HCCI / KA / EW / 0605 / 2000
APPROVALS AND LISTINGS
SPECIFIC USES
For Delivery by Fax Call 1-800-942-4636
Internet See MSDS section of
www.herchem.com
Mail Contact Hercules at address below or
any Hercules representative
SPECIFIC APPLICATIONS*
Megabubble may be used to detect leaks of gas, air, compressed
air, nitrogen, natural gas, refrigerants, CO2, and almost all other
known gases.
PHYSICAL PROPERTIES
Working temperature range: -50° to +200°F.
Appearance/color/odor: Blue liquid, odorless
WARNINGS OR CAUTIONS
• Read all cautions and directions carefully before using product.
• KEEP OUT OF REACH OF CHILDREN.
DIRECTIONS FOR USE
1. Apply megabubble directly to pipe joint, solder joint, valve stem or
any other part being checked.
2. Visually inspect all joints, fittings, gaskets, flanges, seams and
corroded surfaces which may have perforation. Megabubble
indicates where leaks are located. Very small leaks may need a
minute or longer to produce a detectable bubble cluster.
3. Repeat if desired - leak detection depends on careful inspection.
Surfaces can be re-wetted and rechecked.
4. Do not dilute this product. Use directly from container.
5. If using dauber, keep free of dirt and foreign matter. If using spray
and nozzle becomes clogged, remove and rinse with warm water.
6. Remove excess megabubble residue with water spray or wipe off
with damp rag.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT,
REQUEST MATERIAL SAFETY DATA SHEET (MSDS) #59.
HMIS Hazard Warning 0-0-0-A
INGREDIENTS CAS#
Propylene Glycol 57-55-6
NJ-T.S.R. #31348300 5002P, 5060P, 5061P
*For special applications which may not be covered on this or other Hercules
literature, please contact Hercules Technical Services Department by phone
1-800-221-9330, or fax [phone], or visit our technical database
web-site at www.herchem.com.
MIL-L-25567D
Megabubble is used to detect gas leaks on pipelines, fittings, tanks,
coils, cylinders, pressure vessels, valves, and other hard surfaces.
ISO 9001: 2000 Certified