User manual

DJUCED™ and DJ Control AIR
11
(1) Definition
Loop: a portion of an audio track that is played repeatedly. Its symbol is .
(2) Use
Looping, or making a loop, is a way for the DJ to make a rhythm last longer.
The DJ can either:
- Manually set the start and the end of the loop; or
- Set the length of the loop in beats.
(3) Commands in the software
Loop commands are:
- In / Out = Loop In / Loop Out: Loop In places the starting point of the loop, and Loop Out
places the end point of the loop (and clicking on Loop Out again exits the loop playback).
- 1, 2, 4, 8, 16: number of beats per loop.
- Move the loop ,
- Change the loop length
- Loop split function splits the loop into 4 samples: this function is processed by the Magic
button, on DJ Control AIR.
- Easy loops (EZ) function sets the Loop In/Loop Out function to match a fixed beat
number, so that the even if the track plays 4.4 beats (for example) between the moment you
enter Loop In and the moment you enter Loop Out, the EZ setting fixes your loop on exactly 4
beats.
(4) Loop commands on DJ Control AIR
On DJ Control AIR, you can:
- Set the 4 pads to Loop mode by pressing the Loops button in the center of DJ Control AIR.
- Send a Loop In command on pad 1.
- Send a Loop Out command on pad 2.
- Reduce the loop length on pad 3.
- Increase the loop length on pad 4.