User manual

DJUCED™ and DJ Control AIR
12
(5) Display
If you are in a loop, the loop is visible in 2 areas:
- In the waveform display: the part of the track outside of the loop is greyed out.
- On the platter: the loop is displayed in pink.
Each concentric circle of the platter lasts 1 minute (if the track doesn’t exceed 6 minutes), so the pink
area located on this circle shows:
- The loop in the first (outer) circle = in the first minute of this track.
- The loop in the last quarter, starting at 0:48 and ending at 0:52.
(6) Saving loops in the sampler bank
To store a loop in the sampler, display the sampler area by clicking on the square SAMPLER button
over the platter (and over the SEQUENCER button):
- Either drag and drop (with your mouse) the loop from its pink area on the platter to the
sampler player on the column of 4 sample players; or
- Press the button labeled Magic on DJ Control AIR: it cuts the loop into 4 parts of equal length,
and stores these 4 parts on the 4 sample players, to let you control the playback of samples
on the platter’s touch pads; or
- Click on the Loop split button in the DJUCED graphic interface, whose action is the same
as the Magic button.