User manual

DJUCED™ and DJ Control AIR
23
- If you find it too difficult to control the sample volume with the velocity, you can disable this
sampler velocity function in the DJ Control AIR control panel (in the control panel, go to
Advanced, and then switch velocity off for the sampler mode).
(c) Step sequencer
You control the step sequencer in the DJUCED graphic interface:
You can:
- Enable/disable the playback of a sample at each step of the sampler by clicking on the button
in the matrix:
o Columns 1 to 4 represent the samples: 1 sample per column.
o The lines represent the steps.
o The third square on the fifth line controls the playback of the third sample at the fifth
step.
o If the square is blue, the sample is played at this step.
o If the square is grey, the sample is not played at this step.
o If a line is yellow, the step sequencer is currently playing at this step.
- Play/Stop the step sequencer by clicking the / buttons.
- Set the volume of the sequencer with the button.
You can edit the sequence:
- With your mouse: by clicking on the grey/blue square representing each step, to play or not to
play the sample at this step.
- With your keyboard: using the keyboard’s up and down arrows to move the pointer up/down
within the steps of the sequencer, and with the keyboard keys 1, 2, 3, 4 to change the event
on sample 1, 2, 3 or 4 in the step sequencer.