User manual

DJUCED™ and DJ Control AIR
39
As soon as the beats of both tracks play at the same time, you can stop turning the jog wheel, since
the tracks are now synchronized.
f) Checking that the tracks are synchronized
On DJ Control AIR, you can see whether both tracks are synchronized: if so, the LEDs on its VU-
meter (located below the AIR sensor) blink in synchronization.
If the beat LEDs blink at the same time, but not in the same column, you can move the track 1 beat
backward or forward using the Back / Forward buttons on the deck.
g) Playing the track for the audience
Once both tracks are synchronized, you can mix the track you are previewing so that the audience
hears it.
You can either:
- Directly mix the track you have synchronized, by moving the crossfader; or
- Mix using the bass, for example if you have different tones between the songs loaded on deck
A and on deck B.
(1) Play the track directly for the audience, with a short transition
You can directly mix the synchronized track:
- By moving the crossfader to the center, so that the audience hears both the tracks on deck B
and deck A.
- Then move the crossfader from the center to deck A.
(2) Play the track for the audience with a transition using low frequencies
You can make a transition using bass frequencies, prior to mixing from one track to another:
- First, cut the medium and treble frequencies on both decks.