User manual

DJUCED™ and DJ Control AIR
42
In this example:
- Echo is on pad 1.
- Flanger is on pad 2.
- Reverb is on pad 3.
- Chorus is on pad 4.
To change the effect assigned to a pad, you can either:
- Click on the down arrow icon on top of the effect’s name in the software: this displays a menu
allowing you to select the name of the effect with your mouse; or
- Tap twice on the pad on DJ Control AIR, keeping your finger on the pad at the second hit, and
use the DJ Control AIR Up  and Down  buttons (located around the Effects mode button)
to load another effect on the pad.
(c) Applying an effect on the track
Once the effects of your choice are assigned to the pads, you can:
- Play the effect by pressing the pad.
- Stop the effect by pressing the pad again.
The effect is applied on the deck (so, when you apply an effect on deck A, it has no impact on deck B).
(4) Modulating an effect
You can modulate 2 parameters of the effect:
- The velocity with which you tap on the pad modulates the first parameter of the effect.
- Keep your finger on the pad and modulate the second parameter by varying the distance from
your hand to the AIR sensor (the closer your hand, the higher the value of the second
parameter).
You can see the effect modulation:
- On DJ Control AIR: on the 8-LED VU-meter around the AIR sensor.