Product Overview

ManualsBrandsHercules ManualsChemicals & Compounds4 oz. Medium Body, Fast Set PVC Cement (Clear)

SUBMITTAL SHEET: PVC, Medium Body, Fast Set, Clear Cement

SPECIFICATIONS:

PVC, Medium Body, Fast Set, Clear Cement

HCC Holdings, Inc.

4700 West 160th Phone: 800-321-9532

Cleveland, Ohio 44135 Website: www.Oatey.com

PVC, MEDIUM BODY, FAST SET, CLEAR CEMENT Date: August 2017

APPROVALS & LISTINGS

Complies with NSF/ANSI 61 health effects requirements.

PHYSICAL PROPERTIES

Appearance: Clear Liquid

Viscosity: Min. 500 cps @73° F ± 2° F

Density: 7.7 ± 0.2 lbs/gallon

Shelf Life: 3 Years from Mfg. Date

Lap Shear Strength: (min. ASTM Standards)

2 hours 250 psi

16 hours 500 psi

72 hours 900 psi

Set Up Time:

30° F to 50° F 4 - 5 minutes

50° F to 70° F 3 - 4 minutes

70° F to 90° F 1 – 2 minutes

 Medium Body, fast set, clear cement for use on all

schedules and classes of PVC pipe and fittings up to 8”

diameter with interference fit.

 Lo VOC Solvent Cement that meets California South

Coast Air Quality Management Districts (SCAQMD)

1168/316A or BAAQMD Method 40 requirements.

 Recommended for potable water, pressure pipe,

conduit and DWV applications.

 Meets ASTM Standard D2564

Summary of content (3 pages)

PAGE 1
SPECIFICATIONS: PVC, Medium Body, Fast Set, Clear Cement HCC Holdings, Inc. 4700 West 160th Cleveland, Ohio 44135 Phone: 800-321-9532 Website: www.Oatey.com PVC, MEDIUM BODY, FAST SET, CLEAR CEMENT  Date: August 2017 Medium Body, fast set, clear cement for use on all schedules and classes of PVC pipe and fittings up to 8” diameter with interference fit.  Lo VOC Solvent Cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements.
PAGE 2
SPECIFICATIONS: PVC, Medium Body, Fast Set, Clear Cement DIRECTIONS FOR USE Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.
PAGE 3
SPECIFICATIONS: PVC, Medium Body, Fast Set, Clear Cement WARNINGS OR CAUTIONS Read all information carefully before using this product. DANGER!: CAUSES SERIOUS EYE IRRITATION. HARMFUL IF INHALED. MAY CAUSE DROWSINESS OR DIZZINESS. MAY CAUSE RESPIRATORY IRRITATION. REPEATED EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING. Long term overexposure to solvents may cause damage to the brain, nervous system, reproductive system, respiratory system, mucous membranes, liver and kidneys.