Product Overview

SUBMITTAL SHEET: PVC, Medium Body, Fast Set, Clear Cement
2
SPECIFICATIONS: PVC, Medium Body, Fast Set, Clear Cement
DIRECTIONS FOR USE
Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range,
special care must be taken to prepare good joints and prevent exposure to solvents. Stir or
shake before using; if jelly-like, don’t use. Do not thin.
1. Cut pipe ends square, chamfer and clean pipe ends.
2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If
pipe bottoms, it should be snug.
3. Use a suitable applicator at least 1/2 the size of the pipe diameter. For larger size pipe
systems use a natural bristle brush or roller.
4. Clean pipe and fitting with a listed primer.
5. Apply liberal coat of cement to pipe to the depth of the socket, leave no uncoated
surface.
6. Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can
cause weakening and premature failure of pipe or fitting. Apply a second coat of
cement to the pipe.
7. Assemble parts QUICKLY. Cement must be fluid. If cement surface has dried, recoat both
parts.
8. Push pipe FULLY into fitting using a ¼ turning motion until pipe bottoms.
9. Hold pipe and fitting together for 30 seconds to prevent pipe push-out - longer at low
temperatures. Wipe off excess.
10. Allow 15 minutes for good handling strength and 2 hours cure time at temperatures
above 60°F before pressure testing up to 180 psi. Longer cure times may be required at
temperatures below 60°F or with pipe above 3".
DO NOT TEST WITH AIR.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY DATA SHEET (SDS) #92
For Delivery By Fax
Call 1-800-321-9535
Internet
See SDS section of www.Oatey.com
HMIS® ratings Health: 2
Flammability: 3
Physical hazard: 0
SIZE & PACKING
STOCK NUMBER
SIZE
PACKING
WEIGHT/CASE
60103
4 oz.
24
9 lbs.
60113
8 oz.
24
15 lbs.
60115
16 oz.
12
15 lbs.
60120
32 oz.
12
29 lbs.