Product Overview

ManualsBrandsHercules ManualsChemicals & Compounds32 oz. Heavy Body, Slow Set PVC Cement (Gray)

SUBMITTAL SHEET: PVC, Heavy Body, Slow Set, Gray Cement

SPECIFICATIONS:

PVC, Heavy Body, Slo

Set,

Gray

Cement

HCC Holdings, Inc.

4700 West 160th Phone: 800-321-9532

Cleveland, Ohio 44135 Website: www.Oatey.com

PVC, HEAVY BODY, SLOW SET, GRAY CEMENT Date: August 2017

APPROVALS & LISTINGS

Complies with NSF/ANSI 61 health effects requirements.

PHYSICAL PROPERTIES

Appearance: Gray Liquid

Viscosity: Min. 1600 cps @73° F ± 2° F

Density: 7.86 ± 0.2 lbs/gallon

Shelf Life: 3 Years from Mfg. Date

Lap Shear Strength: (min. ASTM Standards)

2 hours 250 psi

16 hours 500 psi

72 hours 900 psi

Set Up Time :

30° F to 50° F 5 - 6 minutes

50° F to 70° F 3 - 4 minutes

70° F to 90° F 1 – 2 minutes

 Heavy bodied, slow set, gray cement for use on all schedules and

classes of PVC pipe and fittings up to 15” diameter with interference fit.

 Lo VOC Solvent Cement that meets California South Coast Air Quality

Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40

requirements.

 Recommended for potable water, pressure pipe, conduit and DWV

applications.

 Meets ASTM Standard D2564

Summary of content (3 pages)

PAGE 1
SPECIFICATIONS: PVC, Heavy Body, Slow Set, Gray Cement HCC Holdings, Inc. 4700 West 160th Cleveland, Ohio 44135 Phone: 800-321-9532 Website: www.Oatey.com PVC, HEAVY BODY, SLOW SET, GRAY CEMENT  Date: August 2017 Heavy bodied, slow set, gray cement for use on all schedules and classes of PVC pipe and fittings up to 15” diameter with interference fit.  Lo VOC Solvent Cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements.
PAGE 2
SPECIFICATIONS: PVC, Heavy Body, Slow Set, Gray Cement DIRECTIONS FOR USE Store and use at temperatures between 40°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jelly-like, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.
PAGE 3
SPECIFICATIONS: PVC, Heavy Body, Slow Set, Gray Cement WARNINGS OR CAUTIONS Read all information carefully before using this product. DANGER!: CAUSES SERIOUS EYE IRRITATION. HARMFUL IF INHALED. MAY CAUSE DROWSINESS OR DIZZINESS. MAY CAUSE RESPIRATORY IRRITATION. REPEATED EXPOSURE MAY CAUSE SKIN DRYNESS OR CRACKING. Long term overexposure to solvents may cause damage to the brain, nervous system, reproductive system, respiratory system, mucous membranes, liver and kidneys.