Product Overview

SUBMITTAL SHEET: UnPurple® Primer for PVC & CPVC

SPECIFICATIONS:

UnPu

rple

Primer

for PVC &

CPVC

HCC Holdings, Inc.

4700 West 160th Phone: 800-321-9532

Cleveland, Ohio 44135 Website: www.Oatey.com

UNPURPLE® PRIMER FOR PVC & CPVC Date: August 2017

APPROVALS & LISTINGS

Complies with NSF/ANSI 61 health effects requirements.

PHYSICAL PROPERTIES

Appearance: Clear Liquid

Density: 6.97 ± 0.2 lbs/gallon

Shelf Life: 3 Years from Mfg. Date

MATERIAL SAFETY INFORMATION

FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY DATA SHEET (SDS) #7402E

For Delivery By Fax

Call 1-800-321-9535

Internet

See SDS section of www.Oatey.com

HMIS® ratings Health: 2

Flammability: 3

Physical hazard: 0

 Professional grade primer for use on all schedules and classes of PVC pipe and

fittings.

 Special purple dye appears clear. Purple color revealed only under a UV Light.

 Lo-V.O.C. Solvent Cement meets California South Coast Air Quality

Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and

various environmental requirements.

 Removes surface dirt, grease and grime as well as softens the pipe surface to

allow a fast, secure solvent weld.

 Meets ASTM F656.

PAGE 1
SPECIFICATIONS: UnPurple® Primer for PVC & CPVC HCC Holdings, Inc. 4700 West 160th Cleveland, Ohio 44135 Phone: 800-321-9532 Website: www.Oatey.com UNPURPLE® PRIMER FOR PVC & CPVC  Date: August 2017 Professional grade primer for use on all schedules and classes of PVC pipe and fittings.  Special purple dye appears clear. Purple color revealed only under a UV Light.  Lo-V.O.C.
PAGE 2
SPECIFICATIONS: UnPurple Primer for PVC & CPVC DIRECTIONS FOR USE Store and use at temperatures between -15°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jellylike, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.