Safety Data Sheet

ManualsBrandsHercules ManualsABS Cement32 oz. Medium Body, Fast Set ABS Cement (Black)

SAFETY DATA SHEET

1. Identification

HERCULES ABS Black, Medium Body, Fast SetProduct identifier

Other means of identification

MSDS #64

Product code

Part Numbers: 60503, 60513, 60515, 60520, 60525

Synonyms

Joining ABS Pipes

Recommended use

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Company Name

HCC Holdings, Inc. an Oatey Affiliate

Address

4700 West 160th Street

Cleveland, OH 44135

Telephone

216-267-7100

E-mail

info@oatey.com

Transport Emergency

Chemtrec 1-800-424-9300 (Outside the US 1-703-527-3887)

Emergency First Aid

1-877-740-5015

Contact person

MSDS Coordinator

2. Hazard(s) identification

Category 2Flammable liquids

Physical hazards

Category 2ASerious eye damage/eye irritation

Health hazards

Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure

Category 3 narcotic effectsSpecific target organ toxicity, single exposure

Category 1Aspiration hazard

Not classified.

OSHA defined hazards

Label elements

Signal word

Danger

Hazard statement

Highly flammable liquid and vapor. May be fatal if swallowed and enters airways. Causes serious

eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness.

Precautionary statement

Prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only outdoors or in a

well-ventilated area. Keep container tightly closed. Ground/bond container and receiving

equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking

tools. Take precautionary measures against static discharge. Avoid breathing mist or vapor. Wash

thoroughly after handling. Wear protective gloves/eye protection/face protection.

Response

Do NOT induce vomiting. If eye irritation persists: Get medical advice/attention. In case of fire:

Use appropriate media to extinguish.

Storage

Store in a well-ventilated place. Keep cool. Store locked up. Keep container tightly closed.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazard(s) not otherwise

classified (HNOC)

Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis.

Supplemental information

Not applicable.

SDS US

HERCULES ABS Black, Medium Body, Fast Set

927428 Version #: 01 Revision date: 12-11-2017 Issue date: 5-27-2015

1 / 8

Summary of content (8 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier HERCULES ABS Black, Medium Body, Fast Set Other means of identification Product code MSDS #64 Synonyms Part Numbers: 60503, 60513, 60515, 60520, 60525 Recommended use Joining ABS Pipes Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Company Name Address HCC Holdings, Inc.
PAGE 2
3. Composition/information on ingredients Mixtures Chemical name Methyl ethyl ketone ABS Resin Acetone CAS number % 78-93-3 40-60 9003-56-9 20-30 67-64-1 10-20 Other components below reportable levels *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 2.04 4.
PAGE 3
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Take precautionary measures against static discharge. Use only non-sparking tools. Keep combustibles (wood, paper, oil, etc.) away from spilled material. Methods and materials for containment and cleaning up Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading.
PAGE 4
ACGIH Biological Exposure Indices Components Determinant Value Specimen Sampling Time Methyl ethyl ketone (CAS 2 mg/l MEK Urine * 78-93-3) * - For sampling details, please see the source document. Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air Appropriate engineering changes per hour) should be used. Ventilation rates should be matched to conditions.
PAGE 5
Viscosity temperature 77 °F (25 °C) Other information Bulk density 7.4 lbs/gal VOC (Weight %) < 325 g/l SQACMD 1168/M316A 10. Stability and reactivity Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Chemical stability Material is stable under normal conditions. Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. Conditions to avoid Avoid heat, sparks, open flames and other ignition sources.
PAGE 6
Specific target organ toxicity repeated exposure Not classified. Aspiration hazard May be fatal if swallowed and enters airways. Chronic effects Prolonged inhalation may be harmful. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
PAGE 7
Packing group Environmental hazards ERG Code Special precautions for user IMDG UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards Marine pollutant EmS Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code II No. 3L Read safety instructions, SDS and emergency procedures before handling. UN1133 ADHESIVES 3 II No. F-E, S-D Read safety instructions, SDS and emergency procedures before handling.
PAGE 8
Methyl ethyl ketone (CAS 78-93-3) 6714 US state regulations US. Massachusetts RTK - Substance List Acetone (CAS 67-64-1) Methyl ethyl ketone (CAS 78-93-3) US. New Jersey Worker and Community Right-to-Know Act Acetone (CAS 67-64-1) Methyl ethyl ketone (CAS 78-93-3) US. Pennsylvania Worker and Community Right-to-Know Law Acetone (CAS 67-64-1) Methyl ethyl ketone (CAS 78-93-3) US. Rhode Island RTK Acetone (CAS 67-64-1) Methyl ethyl ketone (CAS 78-93-3) US.