Product Overview

SUBMITTAL SHEET: Plastic Pipe and Fittings Cleaner

SPECIFICATIONS:

Plastic Pipe and Fittings Cleaner

HCC Holdings, Inc.

4700 West 160th Phone: 800-321-9532

Cleveland, Ohio 44135 Website: www.Oatey.com

PLASTIC PIPE AND FITTINGS CLEANER Date: August 2017

PHYSICAL PROPERTIES

Appearance: Clear Liquid

Density: 6.97 ± 0.2 lbs/gallon

Shelf Life: 3 Years from Mfg. Date

SIZE & PACKING

STOCK NUMBER

SIZE

PACKING

WEIGHT/CASE

60652

4 oz.

8 lbs.

60659

8 oz.

14 lbs.

60664

16 oz.

13 lbs.

60667

32 oz.

25 lbs.

MATERIAL SAFETY INFORMATION

FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY DATA SHEET (SDS) #67

For Delivery By Fax

Call 1-800-321-9535

Internet

See SDS section of www.Oatey.com

HMIS® ratings Health: 3

Flammability: 4

Physical hazard: 1

 All Purpose Cleaner for ABS, PVC and CPVC pipe and fittings.

 Lo-V.O.C. Solvent Cement meets California South Coast Air Quality

Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and

various environmental requirements.

 Fast acting cleaner removes surface dirt, grease and grime from the pipe

surface.

 Apply sparingly to ABS pipe and fittings.

PAGE 1
SPECIFICATIONS: Plastic Pipe and Fittings Cleaner HCC Holdings, Inc. 4700 West 160th Cleveland, Ohio 44135 Phone: 800-321-9532 Website: www.Oatey.com PLASTIC PIPE AND FITTINGS CLEANER Date: August 2017  All Purpose Cleaner for ABS, PVC and CPVC pipe and fittings.  Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
PAGE 2
SPECIFICATIONS: Plastic Pipe and Fittings Cleaner DIRECTIONS FOR USE Store and use at temperatures between -15°F and 110°F. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposure to solvents. Stir or shake before using; if jellylike, don’t use. Do not thin. 1. Cut pipe ends square, chamfer and clean pipe ends. 2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug. 3.