Operation Manual

11/24
5.2. Key features
Back face:
- RCA outputs: these outputs can be used to connect standard speakers or a mixing console to
the DeeJay Trim 4&6. Channels 1-2 are the main output channels for your mix.
- 1/4" jack outputs 1-2: these outputs can be used to connect professional-level gear or a PA
system to the DeeJay Trim 4&6. Channels 1-2 are the main output channels for your mix.
ENGLISH
- Line/phono switches: use these switches to select the input level for the corresponding
inputs. Select phono level when using a phono level turntable.
- Phono grounding screws: use these screws to attach the ground wire from your turntable, to
eliminate buzz and humming interference on the corresponding input.
FRANÇAIS
- RCA inputs: use these inputs to connect your external audio sources, including CD or MP3
players, turntables and more.
- Computer USB cable hook: you can use this hook to make a loop in the USB cable
connecting your computer to the DeeJay Trim 4&6, preventing it from being accidentally
disconnected.
DEUTSCH
Front face:
- Microphone volume control knob: use this knob to control the level of your microphone.
- Mic On-Off button: press this button to turn the microphone on or off (mic is enabled when the
LED is on). When the mic is on, a talk-over attenuation feature automatically lowers the level
of the music playing, so that you can be heard more easily when speaking to the audience.
Please see chapter 6.3.2 Main tab
for more information on selecting the attenuation level.
NEDERLANDS
- VU-meter switch: use this switch to select whether the input levels (switch is up) or output
levels (switch is down) are being displayed on the corresponding VU-meters.
- 4-channel VU-meter: this VU-meter allows you to visually monitor the levels of the
corresponding inputs or outputs. This is very handy to make sure that the levels are neither
too high (which could result in distortion) or too low.
ITALIANO
- Preamplification “trim” control knobs: use these knobs to adjust the preamplification “trim”
level on the corresponding inputs, i.e. the degree to which the levels of the corresponding
inputs are amplified before they are processed by your DeeJay Trim 4&6.
ESPAÑOL
- Headphone volume control knob: use this knob to control the level of your headphones
connected to the headphone connector.
- Headphone output switch: use this switch to select whether channels 1-2 (switch is up) or 3-
4 (switch is down = headphones connected to output channels 3-4, which is the default setting)
are being played over your headphones. This is very useful when mixing two audio sources,
allowing you to preview your next track on your headphones while the current song is playing
for your audience.