User Guide

HOTLINE ITALIANO DEUTSCH ESPAÑOL NEDERLAND ENGLISH FRANÇAIS PORTUGUÊS
User Manual
–
5/16
3. SOFTWARE INSTALLATION
Once your sound card has been installed, switch your PC back on. Because the configuration of
the card is Plug and Play, Windows will automatically detect its presence.
N.B.: your installation screens and procedure may vary slightly from those described in this
manual.
Because drivers are constantly being developed, the driver provided on your
CD-ROM may not be the most recent version. You can visit the Hercules website
(www.hercules.com) to verify this and, if necessary, download the very latest version.
3.1. Driver installation
3.1.1. Driver installation for Windows 98 SE
You will need to insert your Windows CD-ROM to install the FireWire drivers.
Windows will display an
Add New Hardware Wizard
dialog box informing you that the system has found the
following device:
PCI standard PCI-to-PCI bridge
.
- Click on
Next
4 times to install the default drivers.
- Click on
Finish
to complete the setup.
Windows will display an
Add New Hardware Wizard
dialog box informing you that the system has found the
following device:
PCI Multimedia Audio Device
.
- Click on
Cancel
to install your optimized Hercules drivers.
Windows will display an
Add New Hardware Wizard
dialog
box informing you that the system has found the following
device:
PCI OHCI Compliant IEEE 1394 Host Controller
.
- Insert the Windows CD-ROM into your CD-ROM drive.
- Click on
Next
.
The wizard will suggest a
Search for the best driver for your
device. (Recommended)
.
- Click on
Next
.