Operation Manual

User Manual – 19/32
5.3.5. About tab
ENGLISH FRANÇAIS
-
This tab provides all of the information about the package, firmware, driver, MIDI mapping, DJ
API and control panel versions you are using. Please refer to this information when contacting
technical support.
6. OUTPUT OPTIONS
DEUTSCH
Two types of connectors are available for connecting speakers: RCA and 1/8" jack (3.5mm). The
RCA connectors are mono outputs, each of which corresponds to one channel (left = white, and
right = red). The 1/8" jack (3.5mm) connector is a stereo output, which corresponds to two
channels (left and right) on output 1-2 only.
NEDERLANDS
Select the type of connector according to the type of equipment you will be connecting. Normally,
outputs 1-2 will be used for your live mix playing in the room, and outputs 3-4 will be used for
monitoring or connecting an external mixer.
6.1. Connecting speakers and/or an external mixer to your DJ
Console Mk4
ITALIANO
With the included VirtualDJ software, you can play your mix for the audience over a hi-fi system
connected to outputs 1-2 on your DJ Console Mk4, for example, and preview upcoming songs on
outputs 3-4, using your headphones or monitoring speakers.
The included version of VirtualDJ is pre-configured to use the DJ Console Mk4’s built-in
sound card exclusively. As such, it will not be possible to use your computer’s standard sound
card or integrated speakers. A pair of speakers MUST be connected to Output 1-2 on the
back of your DJ Console Mk4.
ESPAÑOL
-
Make sure that your computer and other audio equipment is switched off.
- Connect your main set of speakers to the Output 1-2 RCA plugs (plug 1 corresponds to the left
speaker, plug 2 to the right speaker) or to the Output 1-2 1/8” jack (3.5mm) plug.