Operation Manual

ITALIANO
DEUTSCH
ESPAÑOL
NEDERLANDS
ENGLISH
FRANÇAIS
User Manual – 9/32
5.2. Connecting headphones
Your DJ Console Rmx features 2 headphone connectors: one on the top face, and one on the
front face. The console has been designed to function with DJ headphones (stereo, impedance
from 16 to 64 Ohms).
You can only use one set of headphones at a time: if two sets of headphones are connected
simultaneously, the headphone output on the unit's top face will take precedence over the output
on the front face.
6. INPUT OPTIONS
6.1. Connecting external audio sources
Your DJ Console Rmx allows you to connect virtually any kind of audio source you might wish to
use, including vinyl turntables. You can even use time-coded vinyl records or CDs to control
music files stored on your computer, giving you the ultimate hands-on mixing experience and
combining the best that the worlds of analog and digital have to offer. Now you can enjoy using
hybrid mixing, combining computer audio tracks on one deck with an analog source connected to
the other deck.
Your DJ Console Rmx features 4 audio inputs on its back face: 2 stereo audio inputs, for a total of
2 pairs of dual RCA connectors. Simply connect the audio source of your choice to the white (left)
and red (right) RCA connectors: inputs 1-2 for Deck A, and inputs 3-4 for Deck B. This allows you
to replace the computer audio track played on Deck A with the music played on inputs 1-2, and
replace the computer audio track played on Deck B with the music played on inputs 3-4.
You can even equalize your external audio sources and adjust their volume, just as you can with
a computer audio track. This provides for seamless mixing and full control over the sound of your
mix.
To the right of each set of inputs is a Line-Phono switch: this switch allows you to set the preamp
level for each stereo input to the line (CD/MP3 player, for example) or phono (turntable) level.
The reason for this is a turntable outputs a considerably weaker audio signal than a CD or MP3
player, and therefore requires extra pre-amplification in order to achieve a comparable volume.
When connecting a device such as a CD or MP3 player, be sure to set the Line-Phono
switch to the Line position; otherwise, the input signal will be far too loud and you risk damaging
your equipment.