Operation Manual

18/32– User Manual
While the track on deck A is playing for the audience, press the headphone monitoring button on
deck B (the right-hand deck) so that you can hear the track you will be preparing on deck B on
your headphones while the audience continues to listen to the track being played on deck A over
the speakers in the room (assuming you have a multi-channel sound card that has been
configured for use with headphones in VirtualDJ, as described in chapter
5.3 Monitoring with
headphones
-
). The headphone monitoring button on deck B lights up, indicating that deck B is
being monitored on your headphones.
Step 1:
-
While the track on deck A is playing, mute the EQ controls (Treble, Medium and Bass
knobs) on deck B.
Step 2:
-
As the track on deck A is nearing its end, start up playback on deck B and start moving
the cross fader towards the center.
Step 3:
-
While the tracks on both decks are playing, restore the EQ controls (Treble, Medium
and Bass knobs) on deck B.
Step 4:
-
Mute the EQ controls (Treble, Medium and Bass knobs) on deck A.
Step 5:
-
Move the cross fader all the way to the right, to deck B.
Step 6:
The following diagrams give you an idea of how the Treble, Medium and Bass knobs and cross
fader are adjusted for the procedure described above.
Restore the EQ controls (Treble, Medium and Bass knobs) on deck A, so that you
can prepare the next track to be played on deck A on your headphones; and so on.
Step 1: Mute the EQ controls
(Treble, Medium and Bass
knobs) on deck B.
Step 2: Move the cross fader
to the center.
Step 3:
Restore the EQ
controls (Treble, Medium and
Bass knobs) on deck B.