FR PREMIERS PAS AVEC DJCONTROL MP3 LE ET DJUCED™ 18° ®
FR Installation • Insérez le CD-ROM. • Lancez le programme d’installation. • Suivez les instructions. Plus d'informations (forum, tutoriels, vidéos,...) sur www.HERCULESDJMIXROOM.
1 - CONNECTER DES ENCEINTES et UN CASQUE 2 - CHARGER SA MUSIQUE DANS DJUCED™ 18° 1.1 Branchement sur la carte son stéréo de son ordinateur. Utilisez les boutons suivants pour naviguer dans les dossiers. Naviguer dans la liste des dossiers ou dans les fichiers : 1.2 Branchement sur une carte son externe multicanal. Développer/réduire l’arborescence d’un dossier : FR Accéder à la liste des fichiers dans un dossier : 2.
FR 3 - pré-écouter un morceau 3.2 Appuyez sur le bouton de la platine B (la platine sur laquelle est chargé le morceau que vous souhaitez pré-écouter). La pré-écoute permet de préparer le morceau qui sera diffusé à la suite du morceau en cours de diffusion. Vous pourrez profiter de la pré-écoute pour caler le morceau suivant à diffuser, mettre en pause le morceau à une position précise afin de commencer la lecture à partir de cette position.
4 - lancer un mix FR 4.5 Avant la fin du morceau en cours de diffusion, lancez le morceau suivant chargé sur la platine B. Le mix va consister à enchaîner les morceaux les uns après les autres sans blanc entre les morceaux. B 4.1 Vous avez chargé un morceau sur chaque platine (A et B). Positionnez les faders de volume comme ci-dessous. A 4.6 Pour assurer une transition dans le même tempo, synchronisez les BPM (nombre de battements par minute) du morceau qui attend d’être diffusé.
5 - EFFETS et BOUCLES FR 5.2 Créer et jouer une boucle à partir d’un morceau chargé et en cours de lecture. Un effet (Fx) est un filtre ou une combinaison de filtres appliqué(e) à la musique pour en modifier la sonorité : écho, réverbération... Une boucle –ou loop– est une partie d’un morceau dont vous définissez le début et la fin et qui est joué de manière répétée. Appuyez sur le bouton Shift pour accéder au mode Loops. Si le bouton Shift est éteint, vous êtes en mode Loops=boucles.
6 - UTILISER LES POINTS CUE 7 - créer une liste de lecture Un point Cue est un repère que l’on place dans un morceau. Il permet de reprendre la lecture du morceau à partir de cet emplacement. Accédez à votre musique dans l’explorateur de DJUCED™ 18° en utilisant les boutons suivants : Retournez au dossier contenant votre musique en utilisant les boutons suivants : Mettez en surbrillance l’un des morceaux. apparaît désormais à Le bouton gauche.