Operation Manual

ITALIANO
DEUTSCH
ESPAÑOL
NEDERLANDS
ENGLISH
FRANÇAIS
User Manual – 11/30
- Make dancing easier by enhancing the bass (the bass provides the tempo for dancing).
- Remix songs by boosting the mids (the mids contain the singer’s voice) on one track and
mixing it with another track on the other deck, where you’ve cut the mids.
You can also manipulate the bass to make transitions between two tracks:
- Synchronize the 2 tracks: move the pitch fader to set both tracks at the same BPM.
- Cut out the mids and treble on both decks, keeping only the beat of the bass.
- Move the cross fader from the first deck to the second, while restoring the mids and treble.
6.13. Kill buttons
Use the kill buttons (Bass, Medium and Treble) for each deck to cut off or restore the
corresponding frequency band of the music playing on that deck.
This is a faster way to cut off or restore a frequency band than using the rotary potentiometers,
and allows you to easily create interesting effects for your music with the push of a button.
6.14. Shift button
Changes buttons 1 to 6.
- If the Shift control is disabled (the Shift button's LED is off), buttons 1 to 6 send the functions
assigned to buttons 1 to 6.
- If the Shift control is enabled (the Shift button's LED is lit up in green), buttons 1 to 6 send
another set of functions, and become buttons 7 to 12.
6.15. Control 1 and 2 encoders
Modulate an effect or plugin, if it can be modulated.
In VirtualDJ DJC 5, if the last effect enabled is a flanger, Control 1 modulates the flanger’s delay,
while Control 2 modulates the flanger's frequency. In VirtualDJ DJC 5, if the last effect cannot be
modulated (for example, the beatgrid is a beat repeater on 4 beats which cannot be modulated),
Control 1 and Control 2 have no effect.
6.16. Apply Ctrl. On button
Selects the deck on which Control 1 and Control 2 will be applied.
- If the Deck A LED is lit up, these encoders modulate the last effect enabled on deck A
(left),
- If the Select LED is lit up, these encoders modulate the last effect enabled on DJ
Control Steel, whether on the left or right side of the controller,
- If the Deck B LED is lit up, these encoders modulate the last effect enabled on deck B
(right).