Quick Start Guide

6
7 8
9
Loops Effects Sample
Loops Effects Sample
Loops Effects Sample
Loops Effects Sample
Loops Effects Sample
1 2
X2 ÷2
Loops Effects Sample
Min Max
A
USING THE PADS
USING THE AIR CONTROL PLACING A CUE POINT
CREATING A PLAYLIST
Eects, loops and samples are triggered
using the pads.
7.2 Press on a pad and, while maintaining pressure
on the pad, move your hand above the proximity
sensor to modulate the eect.
SENSOR + PAD
A Cue point is a marker that you can place in a music track. It lets you start
playback of the track from that point.
A playlist is a set of tracks that you choose to group together – as part of a
specic genre (electro, rock...) or theme (favorites, party, birthday, 80s...).
6.1 Applying an eect on a track that has been loaded and is being played
6.2 Playing a sample on a track that has been loaded and is being played
The new playlist appears in the Playlists folder.
9.3 Return to the folder containing your music,
using these buttons:
9.4 In DJUCED™, select one or more tracks using your mouse.
By holding down the SHIFT key on your computer's keyboard, you can select several consecutive les.
Drag and drop the selected les into the playlist you have created (here, “My Playlist”).
More information (forum, tutorials, videos...) available at www.HERCULESDJMIXROOM.com
Press the button.
6.3 Creating and playing a loop from a track that has been loaded and is
being played
Press the button.
Lightly tap on one or more of the
pads to trigger the eect(s).
Tap on one or more pads to trigger the
samples (a short snippet of music or
sound). The more pressure you apply on
the pad, the louder the volume of the
sample played will be. When a sample is
triggered on a pad, the pad stays lit up
the same amount of time as the sample
length: perhaps one second, for a short
sound like a drum hit; a few seconds, for
a sample of music (for example).
The corresponding eect is displayed
in DJUCED™, and is applied to the track
being played.
Click on the button (in the DJUCED™ software) to delete the Cue point.
8.1 Press the button to place a Cue point in the track loaded on deck A, for example.
8.2 Press the button again to start playback from the Cue point you have placed in the track.
Effects
Sample
When a track is being played, tap on pad 1 to create the start of the loop (or “Loop in” point), and then
tap on pad 2 at the moment where you want to mark the end of the loop (or “Loop out” point).
Use the vertical lines in DJUCED™ (1 line = 1 beat), as well as the music being played, to help you
determine the best place for the end of the loop.
DJUCED™ plays a part of the track as a loop. Tap on pad 2 to exit the loop and return to normal
playback.
Tap on pad 3 to divide the loop length in half, and tap on pad 4 to double the length of the loop.
Press the button.
Loops
7.1 Press the button.
Effects
GETTING STARTED WITH
DJ CONTROL AIR AND DJUCED™
9.2 Click the button to create a playlist.
Enter a name for the playlist, then click OK.
9.1 Highlight one of the tracks that you want to
add to the playlist, using these buttons:
The button appears on the left.