AAN DE SLAG MET HERCULES DJCONTROLWAVE EN DJUCED™ DJW
HERCULES DJCONTROLWAVE OVERZICHT De Hercules DJControlWave is een 2-decks DJ-controller met Bluetooth® draadloze technologie. Hiermee kunt u uiterst eenvoudig mixen op een iPad, mede dankzij de speciale DJUCED™ DJW app. Deze controller is compatibel met de volgende iPad-modellen: Laad de accu eerst volledig op voordat u de controller de eerste keer gebruikt. Raadpleeg voor meer informatie sectie 3, DE HERCULES DJCONTROLWAVE OPLADEN.
VEILIGHEIDSINSTRUCTIES - Plaats het apparaat op een vlakke ondergrond om te voorkomen dat het omvalt. - Maak het apparaat nooit open, omdat het gevaar bestaat dat daarbij interne onderdelen worden beschadigd. - Dit apparaat is bestemd voor gebruik in een gematigde omgeving.
1. DE HERCULES DJCONTROLWAVE AANSLUITEN OP EEN IPAD 1.1. Schakel de Bluetooth®-functie in op de iPad Open Instellingen op de iPad en controleer dat de Bluetooth®-functie is ingeschakeld. 1.2. De Hercules DJControlWave koppelen met een iPad - Zet de accuschakelaar onder op - Druk op de aan/uit-knop van het apparaat in de stand ON (AAN). het apparaat om de koppelmodus te activeren. De LED gaat blauw knipperen. Als de LED niet knippert, houd de -knop dan drie seconden ingedrukt.
- Selecteer de Hercules DJControlWave. De status van het apparaat wordt dan vermeld als Verbonden en de LED van de Hercules DJControlWave blijft blauw branden. De enige manier waarop de Hercules DJControlWave kan werken, is door via de Bluetooth®-functie verbonden te zijn met de iPad. Zodra de Hercules DJControlWave is verbonden, geeft de DJUCED™ DJW app aan dat deze met de controller wil communiceren. - Selecteer Sta toe om DJUCED™ DJW te starten als de app reeds op de iPad is geïnstalleerd.
2. DE IPAD OP DE STEUN VAN DE HERCULES DJCONTROLWAVE PLAATSEN De steun kan onder twee verschillende hoeken worden gebruikt zodat het scherm van uw iPad altijd goed afleesbaar is. iPad-steun laag iPad-steun hoog Controleer voor een optimaal stabiele stand dat de voetjes aan de onderkant van de Hercules DJControlWave volledig zijn uitgeklapt. 2.1.
2.2. De steun omlaag klappen - Klap de steun omlaag door achter op de steun de duwen zodat deze los klikt en hem vervolgens omlaag te klappen. Gebruik nooit veel kracht bij het omhoog trekken of dicht klappen van de steun omdat deze dan kan beschadigen. - Zet uw iPad op de steun.
3. DE HERCULES DJCONTROLWAVE OPLADEN De Hercules DJControlWave heeft een accuradius van meer dan acht uur als hij volledig is opgeladen. Het apparaat wordt opgeladen met de meegeleverde mini-USB/USB-kabel en voedingsadapter. 3.1. Opladen met de meegeleverde kabel en voedingsadapter Het volledig opladen van de accu duurt vier uur als het apparaat niet wordt gebruikt tijdens het opladen. 3.2.
3.3. Acculaadniveau Het acculaadniveau wordt weergegeven in de DJUCED™ DJW app. Op de Hercules DJControlWave knippert een accuniveau-indicator rood als het accuniveau onder de 10% komt. De accuniveau-indicator blijft rood branden tijdens het opladen van de accu en gaat uit wanneer de accu volledig is opgeladen.
4. SPEAKERS AANSLUITEN OP DE HERCULES DJCONTROLWAVE U kunt uw mix afspelen op speakers die fysiek zijn aangesloten op uw iPad of op draadloze speakers verbonden via de Bluetooth®-functie. 4.1. De mix afspelen op speakers aangesloten op uw iPad (bedrade verbinding) Sluit de speakers rechtstreeks aan op de koptelefoonuitgang van de iPad (3,5 mm mini-jack connector). 4.2.
- Selecteer de draadloze speaker. De status van het apparaat wordt nu vermeld als Verbonden. Wanneer u muziek naar een draadloze speaker streamt, hoort u mogelijk enige vertraging. Dit verschilt per model speaker.
5. HET PREVIEWEN VAN TRACKS Met previewen kunt u de track voorbereiden en beluisteren die u wilt afspelen na de track die nu wordt afgespeeld. U previewt een track op een koptelefoon terwijl de mix wordt afgespeeld op de ingebouwde luidspreker van de iPad of op speakers aangesloten op de iPad. - Sluit de meegeleverde splitterkabel aan op de koptelefoonuitgang van de iPad.
6. DE HERCULES DJCONTROLWAVE OP PC/MAC De Hercules DJControlWave werkt ook op een pc of Mac met elke DJsoftware die MIDI-opdrachten kan verwerken. - Installeer op een pc of Mac een DJ-software applicatie die compatibel is met MIDI zoals DJUCED 40°, Traktor of VirtualDJ. De pc/Mac-versie van DJUCED 40° kan gratis op het volgende adres worden gedownload: http://www.djuced.