Operation Manual

eCAFÉ™ Slim HD eCAFÉ™ EX HD
34/52 – User Manual
3.7. Connecting to the Internet
3.7.1.Connecting to the Internet via Wi-Fi
Your eCAFÉ™ features a built-in Wi-Fi card, allowing you to detect and connect to Wi-Fi networks in the
area; to enable and disable this feature, use the switch located on the left-hand side of your
netbook.
If you want to connect to the Internet via Wi-Fi, make sure that the feature is enabled (the WiFi
indicator on the side of the netbook should be flashing).
- If required, enable your eCAFÉ™'s Wi-Fi feature by pushing the switch towards the right (the green
mark visible behind the switch indicates that the Wi-Fi feature is enabled). The computer's Wi-Fi indicator
should start flashing.
eCAFÉ™ uses the Wi-Fi feature's current setting. Therefore, if you disabled this feature when
using your netbook, you will need to re-enable it when you next restart your eCAFÉ™, by moving the
switch towards the right (the green mark visible behind the switch indicates that the Wi-Fi
feature is enabled).
Connecting to a detected network:
- Click the network icon located in the taskbar.
- In the list of detected networks, click on the relevant network.
- If the network is secure, enter the required security key.
Note: if an authentication request window is displayed, enter the administrator password (you
define this password when starting up your system for the first time – please refer to section
2.2.2. Configuring your eCAFÉ™'s settings and administrator password), then click
Authenticate. Doing so will unlock the safe, allowing you to store the security key requested
by the Wi-Fi network. For more information about the safe, please refer to section 3.3.2. A safe
to secure your passwords (the Keyring).
- Click Connect.
Wait for your eCAFÉ™ to connect to the network: the No connection available icon displayed in the
taskbar bar switches to Signal found, and the netbook's Wi-Fi icon lights up steadily. Then, launch your
web browser.