Operation Manual

Hercules ePlug 200
User Manual – 11/42
- Press for 3 seconds on the Connect button on one
of the adapters already connected to the network.
You have 2 minutes to connect the new
adapter.
- Press for 3 seconds on the Connect button on the
Hercules ePlug 200 adapter.
The
LED lights up when a connection to
the network has been established.
- Repeat this procedure to add another Hercules
ePlug 200 adapter.
2. Connection to the network
The network password is applied to the Hercules ePlug adapter, which can now communicate with all the
adapters of the existing network.