Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
10/72 – User Manual
2.3. You haven't yet created a HomePlug network: initial
installation of Hercules ePlug 200 V2/HD Duo
The HomePlug AV standard of Hercules ePlug 200 adapters is not compatible with the
Homeplug 1.0 standard of Hercules ePlug 85 adapters and HomePlug 14 Mbits/s
adapters, but these two standards can coexist side-by-side. In effect, if you have already
installed a HomePlug network in the HomePlug 1.0 standard (for example, with Hercules
ePlug 85 adapters), you cannot add Hercules ePlug 200 adapters to that network. However,
you are perfectly able to install a second network in your home composed of Hercules
ePlug 200 adapters and HomePlug AV compatible devices.
To install a HomePlug network:
1. Connect the Ethernet cable to the first adapter’s
Ethernet connector.
2. Connect the adapter to a power outlet located
near the device that you want to connect to the
network.
Then, connect the other end of the
Ethernet cable to the computer, modem, console or
any other network device (e.g. a modem/router).