Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
User Manual – 11/72
3. Connect the Ethernet cable(s) to the second
adapter’s Ethernet connector(s).
Hercules ePlug 200 HD: you can connect up
to 3 devices (e.g. an HD TV set, a game
console and a set-top box, or 3 computers).
4. Connect the adapter to a power outlet. Then, connect the other end of the Ethernet cable(s) to your
network device.
Hercules ePlug 200 HD: if required, you can connect another device to the additional
connector (e.g. a power strip, modem or printer).
To optimize data transfers over the PLC network, avoid connecting your adapter directly to a
power strip. Once your adapters are connected, the indicator (i.e. the connection
status indicator) lights up to confirm that the network is operating correctly. Signal quality is
also defined by a colour code, described in Chapter 1.5., LEDs overview.