Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
User Manual – 29/72
3.8. Updating the firmware
To benefit from the latest firmware version, you can visit the Hercules website (http://ts.hercules.com) and
verify whether new firmware is available for your ePlug adapters. Follow the instructions and save the file to
your hard disk drive.
- In the Tools tab, click the button and select the location of the firmware update file on your
computer.
- Click Update the firmware.
3.9. Restoring the factory default settings of the ePlug adapter
connected to the PC
If you encounter a connection problem, you can restore the factory default settings via ePlug Station.
This procedure will restore the factory default settings of the adapter connected to the PC
only. If you have previously modified the network password, this adapter will no longer be part
of the network.
Restoring the factory default settings via ePlug Station is the equivalent of pressing the reset
button on your Hercules ePlug 200 V2 adapter for 3 to 5 seconds, or pressing the pairing
button on your Hercules ePlug 200 HD adapter for 15 seconds or more.