Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
4/72 – User Manual
1.1. Recommendations
- Only connect the Hercules ePlug 200 V2/HD adapter to an electrical network which conforms to the security
standards and specifications detailed on the device's electrical rating plate. If you are not sure about your
electrical network, contact an electrician or your power supplier.
- Never open up the Hercules ePlug 200 V2/HD adapter, as doing so risks damaging its internal components.
- Do not attempt to insert any objects into the vents and openings of the Hercules ePlug 200 V2/HD adapter.
- Do not obstruct the vents and openings of the Hercules ePlug 200 V2/HD adapter.
- If you need to carry out any maintenance on your Hercules ePlug 200 V2/HD adapter, be sure to first unplug
the adapter and entrust the job to a qualified professional in order to avoid the risk of electrocution.
- In order to avoid the risk of fire or electrical discharge, keep your adapter away from:
- rain or humidity, as well as all fluids (water, chemical products and any other liquids),
- sources of heat such as heaters, stoves and any other heat-producing devices (including amplifiers),
- direct sunlight.
- Only plug in the Hercules ePlug 200 V2/HD adapter in a sufficiently ventilated room.
- Only connect the Hercules ePlug 200 V2/HD adapter using the included Ethernet cable.
- Unplug the Hercules ePlug 200 adapter from its electrical outlet if you do not plan on using it again for an
extended period of time.
- Unplug the Hercules ePlug 200 V2/HD adapter from its electrical outlet before cleaning. Use a soft cloth for
cleaning and avoid using aerosol cleaners, water, solvent-based chemical products, benzene, alcohol or other
cleaning products.
- Always keep children away from electrical outlets.
1.2. Specifications
 Atheros 6400 chipset
 Compatible with the IEE 802.3, IEE 802.3u, IEE 802.3x and Auto MDI/X specifications
 Compatible with the Homeplug AV standard
 Coexists with HomePlug 1.0 modules
 Encryption via the AES 128-bit security protocol
 200 Mbits/s theoretical transfer rate
 Asynchronous transmission mode
 Modulation: OFDM, 1024/256/64 QAM, QPSK, BPSK
 200m range over the electrical network
 Ethernet RJ45 port
 Average power consumption:
 ePlug 200 V2: : 2,4W when in use, 0,95W when no data is circulating (these values may vary
depending on your home's electrical system)
 ePlug 200 HD: 2,4W when in use, 0,95W when no data is circulating (these values may vary
depending on your home's electrical system)
 Internal power supply: 100~ 240V AC, 50/60Hz
 Connect button, allowing you to add a Hercules ePlug 200 adapter to an existing network
 Factory reset button
 LEDs on front face