Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
User Manual – 5/72
1.3. Minimum system requirements
To connect a device to your Hercules ePlug 200 V2/HD adapter:
 An Ethernet type network interface must be available on each device to be connected (computer, game
console, modem, router, TV decoder, etc.)
To access the Internet with the Hercules ePlug 200 V2/HD adapter:
 Active Internet line
 Internet Explorer 6.0, Netscape Navigator 4.7 or Mozilla Firefox 1.0 or higher
 ADSL Ethernet modem, cable modem, Internet “Box” (Livebox
®
, Freebox
®
, Neufbox
®
…)
1.4. Box contents
Please verify that the following elements are present in the box:
 Depending on the pack:
- Hercules ePlug 200 HD Solo: 1 ePlug 200 HD adapter
- Hercules ePlug 200 HD Duo: 1 ePlug 200 HD adapter and 1 ePlug 200 V2 adapter
 Quick Start Guide in English
 Ethernet cable (1 per adapter)
The "Hercules ePlug Station" network configuration and supervision software is available for
download at http://www.hercules.com.
1.5. LEDs overview
Hercules ePlug 200 V2
: HomePlug connection status
LED:
- Green: very good connection (transfer
rates greater than 60 Mbits/s)
-
Orange: fairly good connection
(transfer rates between 60 and
40 Mbits/s)
-
Red: mediocre connection (transfer
rates less than 40 Mbits/s)
: Power LED: flashes during traffic
: Ethernet connection LED:
- lit u
p when the Ethernet cable is
connected
- flashes during data transfer
Hercules ePlug 200 HD