Operation Manual

Hercules ePlug 200 V2 Hercules ePlug 200 HD
6/72 – User Manual
1.6. Connectivity overview
Hercules ePlug 200 V2
 Power plug to plug the Hercules ePlug 200 V2 adapter into
an electrical outlet
 Ethernet port allowing you to connect a device to the
Hercules ePlug 200 V2 adapter (desktop computer, laptop or
netbook computer, modem/router, Internet “box”)
 Pairing button with two functions, allowing you to:
- enable pairing, in order to connect other ePlug 200
adapters to the network (
by way of a short press,
from 2 to 4 seconds): the power LED flashes
- randomly generate a new network password (by
way of a long press, of more than 15 seconds): the
adapter restarts
 Reset button, allowing you to restore factory default settings
(by way of a short press from 3 to 5 seconds, using a pointed
object): the adapter restarts
Hercules ePlug 200 HD
 Additional electrical outlet to plug in another electrical
device
 3 Ethernet ports
enabling you to connect up to 3 different
devices (e.g. game console, TV set-top box or TV set)
 Pairing button with two functions, allowing you to:
- enable pairing, in order to connect other ePlug 200
adapters to the n
etwork (by way of a short press,
from 2 to 4 seconds): the power LED flashes
- randomly generate a new network password (by
way of a long press, of more than 15 seconds): the
adapter restarts
 Reset button, allowing you to restore factory default settings
(by way of a short press from 3 to 5 seconds, using a pointed
object): the adapter restarts
 Power plug to plug the Hercules ePlug 200 HD adapter into
an electrical outlet
In order for the Hercules ePlug 200 adapter to switch to standby mode, the network card on
your computer or other network device must be inactive (i.e. no data is being transferred). To
be sure that the network card remains inactive, you can unplug the computer from its electrical
outlet, particularly if you don't intend to use it again for some time, or, if the computer is
plugged into a power strip with an On/Off button, you can press the Off button on the power
strip.
