Operation Manual

Hercules ePlug 500 Nano
User Manual – 15/73
- Repeat this procedure to add another Hercules
ePlug 500 Nano adapter.
Connection to the network
The network password is applied to the Hercules ePlug 500 Nano adapter, which can now communicate with
all the adapters of the existing network.
If the connection of your adapter to the network has failed, there are several possible causes.
Cause 1: You may not have carried out the connection procedure properly:
- Press for 1 second on the Connect button (also referred to as the security button by some
manufacturers) on the adapter which is already part of your existing network.
- Make the connection by pressing for 1 second on the Connect button on your Hercules ePlug
500 Nano adapter. You have 2 minutes to carry this out.
Cause 2: Your adapter may not be properly plugged into an electrical outlet, or this
outlet is not powered:
- Verify that the adapter's power LED is lit up.
Cause 3: There may be a strong disturbance in your electrical network caused by other
devices near to your adapter:
- Avoid plugging your adapter directly into a power strip.
- Unplug the devices plugged in near to the adapter.
- Try plugging the adapter into another outlet.