Operation Manual

Hercules ePlug 500 Nano
User Manual – 59/73
1. Click Start/All Programs/Accessories/
Communications/ Network Setup Wizard.
The Network Setup Wizard is launched.
2. Click Next twice.
The window opposite may appear if The Wizard
found disconnected network hardware.
3. If your Ethernet network connection is not
displayed in the list, tick the Ignore
disconnected network hardware box, then
click Next. Otherwise, exit the Wizard by
clicking Cancel and establish the connection
from your network device to your router (for
more information, please refer to your router's
manual).
The window opposite may appear if The Wizard
found a shared Internet connection on the
computer.
4. Select No, let me choose another way to
connect to the Internet, then click Next.
5. In the Select a connection method window,
select the Other option.
6. In the following window, select This
computer connects to the Internet directly
or through a network hub, then click Next.