Operation Manual

Hercules ePlug 500 Nano
User Manual – 65/73
Proceed as follows for each computer:
9. Enter the computer name and a description, if
required.
Give the computer a name that is unique and
sufficiently distinctive, making it easy to recognize
on the network (my-computer, HomePlug-
computer or julie, for example).
10. Click Next.
11. Enter the workgroup name (HOME, OFFICE
or HERCULES, for example) and a
description, if required.
The workgroup name must be identical (be sure to
respect the case of letters) for all computers you
wish to link together in a network.
12. Click Next.
13. Verify the configuration settings you have
entered in the window that appears, then click
Next.
The Wizard configures the computer. This may
take a few minutes.
If your network is only composed of computers
running Windows XP:
14. Select the Just finish the wizard option.
If your network is composed of computers running
Windows XP and/or computers running
Windows 98 SE, Me, 2000):
15. You can select the Create a Network Setup
Disk option. This consists of copying this
Wizard onto a storage medium (your choice of
floppy disk or USB key) so that it can be
launched on computers equipped with
operating systems other than Windows XP.
This operation is carried out automatically, once you have selected a medium for saving the Wizard.