Owner's Manual

ManualsBrandsHercules ManualsOtherHERCULES HCB42B Cordless Oscillating Multi-Tool

Model

HCB42B

Battery and Charger Sold Separately

20V Brushless Oscillating Multi-Tool

WARNING: To prevent serious injury, User must read and

understand Owner’s Manual. SAVE THIS MANUAL.

When unpacking, make sure that the product is intact and

undamaged. If any parts are missing or broken, please call

1-888-866-5797 as soon as possible. Reference

57319.

Owner’s Manual &

Safety Instructions

Summary of content (8 pages)

PAGE 1
Owner’s Manual & Safety Instructions Model HCB42B Battery and Charger Sold Separately 20V Brushless Oscillating Multi-Tool WARNING: To prevent serious injury, User must read and understand Owner’s Manual. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Reference 57319.
PAGE 2
IMPORTANT SAFETY INFORMATION GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 7KH WHUP ƎSRZHU WRROƎ LQ WKH ZDUQLQJV UHIHUV WR \RXU EDWWHU\ RSHUDWHG FRUGOHVV SRZHU WRRO Work Area Safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2.
PAGE 3
Power Tool Use and Care 1. Do not force the power tool. Use the correct power tool for your application. 7KH FRUUHFW SRZHU WRRO ZLOO GR WKH MRE EHWWHU DQG safer at the rate for which it was designed. 2. Do not use the power tool if the Switch does not turn it on and off. $Q\ SRZHU WRRO that cannot be controlled with the Switch LV GDQJHURXV DQG PXVW EH UHSDLUHG 3. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
PAGE 4
12. The battery Charger gets hot during use. The Charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment. Do not place the Charger on a flammable surface. Do not obstruct any vents on the Charger. Especially avoid placing the Charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the Charger.
PAGE 5
Warning Symbols and Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
PAGE 6
OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Battery Charging Charge battery after unpacking and before using this tool. Follow instructions included with battery charger (sold separately). Accessory Installation General Operation To prevent serious injury: Grip the tool firmly in both hands. 1.
PAGE 7
Cleaning, Maintenance, and Lubrication MAINTENANCE AND SERVICING Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Switch is locked and Battery Pack is removed before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1.
PAGE 8
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.