User Manual

Subject to change without notice

Herga Technology Ltd

Northern Way,

Bury St. Edmunds, Suffolk

IP32 6NN - UK

sales@herga.com

www.herga.com

+44 (0)1284 701422

Installation Instructions for

6225-0020 USB Footswitch

The Herga USB footswitch is programmed by the user to simulate up to three simultaneous keystrokes.No software installation is required

as it will be recognised by the operating system once plugged into a USB socket Programming is done simply by setting small switches

inside the footswitch having removed the cover. (See pages 2 and 3)

• Customer programmable USB footswitch

• Emulates keyboard functions, up to 3 keys

simultaneously

• Plug and Play technology, no additional

drivers required

• Grey cover and base

• 2.5m cable

• Works with Windows™, Linux™ & Mac™

• Rated 20mA 5V DC

DReference Dimensions

• Power : 5V @ 20 mA

• Working temperature : 10~ 60ºC

• Weight : 600g

• Moulded Glass ﬁlled nylon plastic

construction

• Sealed to IPX2

• USB HID Compliant ( No software drivers

required )

DSpeciﬁcations

Installation Instructions for 6225-0020 USB Footswitch 16/12

PAGE 1
Installation Instructions for 6225-0020 USB Footswitch The Herga USB footswitch is programmed by the user to simulate up to three simultaneous keystrokes.No software installation is required as it will be recognised by the operating system once plugged into a USB socket Programming is done simply by setting small switches inside the footswitch having removed the cover.
PAGE 2
Installation Instructions for 6225-0020 USB Footswitch DSetting the Footswitch Function Remove the base via the screws on the underside with a screwdriver. The base will then come away revealing the switches. Find the Key (or combination of keys ) you require on the tables below and set SW1 or 2 accordingly for each of the LEFT and RIGHT footswitches. For test purposes each footswitch is supplied with the switches set to the character ‘a’.