User manual

2C Screen IT

2C504/2C505

2C520/2C521/2C525

User Manual

Imported and Distributed in Australia by

Herma Technologies

Factory 4A, 6 Albert St

Preston, VIC 3072

For more information please go to

www.2cdisplays.com.au

or call 1300 730 025

Jun08 V1

Note: Warranty does not cover un-installing

or re-installing unit.

Protecting your Screen:

To ensure long lasting viewing enjoyment keep the

screen rolled up when not in use. Check both the

front and back surfaces before retracting into the

case to make sure it is free of dust, dirt, insects or

other foreign matter. Use a soft brush or cloth to

lightly remove any foreign particles.

Cleaning your Screen:

Use warm water with a mild detergent to remove

any marks on the surface (only dab, do not rub) or

screen casing. Immediately dry the screen with a

soft cloth or towel. Do not leave it to air dry.

Never use any solvents, chemicals or abrasive

cleaners on the screen surface as they can

permanently damage the screen surface.

Feb 2009 Version 1

PAGE 1
Protecting your Screen: To ensure long lasting viewing enjoyment keep the screen rolled up when not in use. Check both the front and back surfaces before retracting into the case to make sure it is free of dust, dirt, insects or other foreign matter. Use a soft brush or cloth to lightly remove any foreign particles. Cleaning your Screen: Use warm water with a mild detergent to remove any marks on the surface (only dab, do not rub) or screen casing. Immediately dry the screen with a soft cloth or towel.
PAGE 2
To the owner Electrical installation Limit settings Congratulations on purchasing a 2C Screen IT, This screen is designed to produce the sharpest, most pleasing pictures with maximum convenience. 2C Screen IT come with an Australian standard plug. Simply plug in and your screen is ready to use. The screen is fitted with 2 limits. The limits automatically stop the screen in the fully UP (top limit) and fully Down (bottom limit) positions. You can adjust the bottom limit to set your viewing height.