User manual

2C Show IT

2C406/407/408/409

User Manual

Imported and Distributed in Australia by

Herma Technologies

Factory 4A, 6 Albert St

Preston, VIC 3072

For more information please go to

www.2cdisplays.com.au

or call 1300 730 025

Jun08 V1

Protecting your Screen

To ensure long lasting veiwing enjoyment, always

keep the screen rolled up when not in use.

Examine both the front and back surfaces before

retracting into the case to make sure it is free of

dust, dirt, insects or other foreign matter.

Use a soft brush or cloth to lightly remove any

foreign particles.

CAUTION: Do not let go of the screen when it is

retracting. You can cause damage to the screen or

casing by retracting too quickly.

Cleaning your Screen

NEVER attempt to use any solvents, chemicals or

abrasive cleaners on the screen surface.

Use a mild detergent with warm water to remove

any marks on the surface or screen case. Always

pat the screen dry with a soft cloth of towel

after cleaning.

Oct 2009

Size Format Image

(mm)

Case Length

(mm)

Weight

(kg)

60” 4:3 1220 x 910 1380 4.5

80” 4:3 1630 x 1220 1790 5.4

60” 16:9 1330 x 745 1490 4.8

80” 16:9 1770 x 995 1930 6.2

PAGE 1
Protecting your Screen To ensure long lasting veiwing enjoyment, always keep the screen rolled up when not in use. Examine both the front and back surfaces before retracting into the case to make sure it is free of dust, dirt, insects or other foreign matter. Use a soft brush or cloth to lightly remove any foreign particles. CAUTION: Do not let go of the screen when it is retracting. You can cause damage to the screen or casing by retracting too quickly.
PAGE 2
To the owner Congratulations on purchasing a 2C Show IT Protable Screen, designed to produce the sharpest, most pleasing pictures with maximum convenience. 3. Extend the support rod to the desired height and lock into place. 5. Lock the screen onto the support rod with the handle Using your screen 1. Lie the screen flat on the floor and swing out the feet so that they are perpendicular to the casing. 6. Extend the Support Rod to the desired viewing position and lock into place.