User Manual

Customer manual
LFM 4x Reader
RFID
WE GENERATE SOLUTIONS
HERMOS AG
Gartenstraße 19 • 95490 Mistelgau
Phone: [phone] - 0
E-mail: [e-mail]
LFM 4x Reader Rev1.4
17
www.hermos.com
The HERMOS LF reading devices support a test mode that facilitates setting up the antenna and
checking the reading ranges during commissioning. HF reading devices feature several DIP swit-
ches on the housing. These switches can be used to activate test mode.
The functions in test mode are described on a sticker located on the reading device housing. The
evaluation of the DIP switch depends on parameters
If the device is in test mode, the red status LED flashes at about 1 Hz. The yellow status LED then
indicates the status of the test mode. If the read or write process was unsuccessful, the yellow LED
flashes at the read or write frequency. If the read or write process is successful, the yellow LED
remains permanently lit.
With the existing I / O module, HERMOS LF readers with ASC-W1 protocol also show the success-
ful or incorrect reading of the transponder at the respective first output port. See also behavior of
the output ports in test mode.
see also chapter „DIP-switch“
6.3 Illustration
6.3.1 Top view
1. Black and white anodised aluminium
housing
2. Reading device type imprint
3. Data Matrix Code
www.hermos.com