Owner's Manual

H8 DSP

Digital Interface Processor

User’s manual

AUXILIARY STEREO

PREAMPLIFIER SOURCE

AUXILIARY STEREO

PREAMPLIFIER SOURCE

MP3 PLAYER

PRE OUT

RADIO DECK

SRC

MEM

TOSLINK

CONNECTOR

OPTICAL CABLE

DRC HE (optional)

5.5 LOW-LEVEL INPUT SIGNALS

5.6 OPTICAL IN DIGITAL INPUT

AUX IN L/R: Auxiliary analog stereo signal.

Sensitivity is adjustable from 0.6 to 5 V RMS

DIGITAL INPUT- WARNING: the digital input accepts up to

96 kHz / 24 bit stereo PCM signals. So DOLBY

DIGITAL (AC3) multi-channel signals coming from

audio/video sources (such as the audio of a film

in DVD) or DTS can not be reproduced. The output

of these devices will therefore be set in STEREO

mode for the signal to be reproduced. If digital

signals at frequency higher than 96kHz (Ex. 192 kHz)

are supplied, the H8 DSP locks up.