Datasheet

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_16.A
6
Power Supply
Inputs / Outputs / Filter
Size / Weight
Amplifier Stage
Power supply voltage / fuse: 11 ÷ 15 VDC / 3 x 30 A
Idling current (power ON/OFF): 0.8 A / 1 mA
Consumption @ 2 Ω, 14.4 VDC
(Max Musical Power): 45 A
Remote In: 7 ÷ 15 VDC - 1 mA
ART: Automatic Remote Turn-On/Off with Speaker-In
INPUTS: PRE IN / SPEAKER IN
Pre out Hi-Pass: 50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL: Yes
Lo-Pass: 50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust): (0 ÷ 6) dB
PHASE (adjust): (0 ÷ 180) deg
Remote Volume Control (adjust): (-50 ÷ 6) dB
Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97
Weight (kg / lb.): 3,0 / 6,61
Features:
Distorsion - THD (100 Hz @ 4 Ω): 0.25 %
Bandwidth: 10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V): 100 dB
Damping factor (100 Hz @ 4 Ω): > 100
Pre-In sensitivity: 0.2 ÷ 5 VRMS
Speaker-In sensitivity: 0.8 ÷ 20 VRMS
Load impedance (MIN): 2 Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch: 600 W x 1 (4 Ω)
1 Ch: 1100 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch: 740 W x 1 (4 Ω)
1 Ch: 1240 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power
(4Ω, ≤1 % THD + N, 14.4 V): 600 W x 1 Ch
S/N Ratio (ref. 1 W output): 80 dBA
1. Compact design built from extruded aluminum heatsink with the top side
ensuring effective transfer of the heat.
2. Special balanced high-noise rejection input circuitry on the Pre-In or
Speaker-In inputs.
3. Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
4. Selectable ART, Automatic Remote Turn-On/Off function, automatically turns
on and off the amplifier when the OEM radio turns on and off
(can be enabled/disabled, with only Speaker-In inputs).
5. Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors,
D-Class 2 Ω stable output stage.
6. Pre-outs, also available when using Speaker-In level inputs, equipped with Hi-Pass
filter with adjustable 12 dB/Oct. slope with continuity between 50 and 250 Hz,
providing the ability to create Front + Sub multi-amplification active systems.
7. Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB, for more
punch from the subwoofer.
8. Full-range and Lo-Pass crossover filters with 24 dB/Oct. slope and variable
frequency (50 Hz - 250 Hz), both selectable, with a greater application versatility
for the design of active systems.
9. SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from
music signal to prevent damage to the subwoofer.
10. Continuously adjustable PHASE control (0 to 180°); it optimizes alignment of
woofer bass frequencies with sub ones.
11. Optional Remote Volume Control (HRC); providing the ability to adjust
subwoofer volume level from the dashboard.
HCP 4
760 W
MAX POWER
HCP 2
400 W
MAX POWER
HCP 1D
1400 W
MAX POWER
HCP 5D
1500 W
MAX POWER
FIVE CHANNEL D-CLASS AMPLIFIER WITH
CROSSOVER
HCP 4D
1160 W
MAX POWER
MONO D-CLASS AMPLIFIER WITH CROSSOVER
HCP 1DK
2480 W
MAX POWER
MONO D-CLASS AMPLIFIER WITH CROSSOVER
STEREO AMPLIFIER WITH CROSSOVER
HCP 2X
800 W
MAX POWER
STEREO AMPLIFIER WITH CROSSOVER
FOUR CHANNEL AMPLIFIER WITH CROSSOVER
FOUR CHANNEL D-CLASS AMPLIFIER WITH
CROSSOVER
HRC
OPTIONAL
Configurations
Speaker Output Pre Output
Hz
HI PASS 12 dB
LO PASS 12 dB
Hz
FULL
Hz
FULL
Hz
50÷500
80
HCP 2
Hz
HI PASS 12 dB
LO PASS 12 dB
Hz
FULL
Hz
50÷3200
50÷3200
Hz
LO PASS 12 dB
HI PASS 12 dB
Hz
FULL
Hz
50÷3200
50÷3200
HCP 2X
HCP 1D
25
Hz
Hz
LO-PASS 24 dB
SUBSONIC 24 dB
Hz
HI PASS 12 dB
Hz
FULL
Hz
SUBSONIC 24 dB +
LOPASS 24 dB
50÷250
25
25
50÷250
50÷250