Technical Datasheet

www.hertzaudiovideo.com
Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All specications subject to change without notice_12.A
Power Supply
Size / Weight
Amplifier Stage
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 25 A
Idling current (power ON/OFF): 2 A / 0.04 mA
Consumption @ 2 Ω, 14.4 VDC
(Max Musical Power): 30 A
Remote In: 7 ÷ 15 VDC - 1 mA
ART
TM
: Automatic Remote Turn-On/Off with Speaker-In
Inputs / Outputs / Filter
INPUTS: PRE IN / SPEAKER IN
FRONT Ch. filters FULL: Yes
Hi-Pass: 50 ÷ 5k Hz @ 12 dB/Oct.
REAR Ch. filters FULL: Yes
Hi-Pass: 50 ÷ 5k Hz @ 12 dB/Oct.
Band-Pass: 50 ÷ 500 Hz (Hi) @ 12 dB/Oct.
50 ÷ 5 kHz (lo) @ 12 dB/Oct.
SUB Ch. filter LO-PASS: 50 ÷ 500 Hz @ 24 dB/Oct.
SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust): (0 ÷ 12) dB
Remote Volume Control: (-50 ÷ 6) dB
Max size (mm / in.): 345 x 190 x 50 / 13.58 x 7.48 x 1.97
Weight (kg / lb.): 2,61 / 5.75
Features:
Distorsion - THD (100 Hz @ 4 Ω): 0.02 %
Bandwidth FRONT/REAR: 10 ÷ 50k Hz
Bandwidth SUB: 10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V): 100 dB
Damping factor (100 Hz @ 4 Ω) FRONT/REAR: 100
Damping factor (100 Hz @ 4 Ω) SUB: 250
Pre-In sensitivity: 0.6 ÷ 5 VRMS (15 k Ω)
Speaker-In sensitivity: 1.5 ÷ 12 VRMS (47 Ω)
Load impedance (MIN) @ 5 Ch: 2 Ω
@ 3 Ch: 4 Ω + 4 Ω + 2 Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
5 Ch: 55 W x 4 + 160 W x 1 (4 Ω)
5 Ch: 90 W x 4 + 280 W x 1 (2 Ω)
3 Ch: 180 W x 2 (4 Ω) + 160 W x 1 (4 Ω)
3 Ch: 180 W x 2 (4 Ω) + 280 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
5 Ch: 65 W x 4 + 200 W x 1 (4 Ω)
5 Ch: 105 W x 4 + 330 W x 1 (2 Ω)
3 Ch: 210 W x 2 (4 Ω) + 200 W x 1 (4 Ω)
3 Ch: 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power (4 Ω, ≤ 1 % THD + N, 14.4 V):
50 W x 4 Ch + 150 W + 1 Ch
S/N Ratio (ref. 1 W output):
(50 W Ch) 83 dBA
(150 W Ch) 85 dBA
1. Compact design built from an extruded aluminum heatsink with the top side
ensuring effective transfer of the heat generated by the power electronic
components.
2. Special balanced input circuitry to reject electromagnetic disturbances pre
sent on the Pre-amplied or Speaker level inputs.
3. Input featuring both Speaker-In (OEM radio) and RCA-In (Aftermarket radio)
inputs.
4. Selectable ART™, Automatic Remote Turn-On/Off function, automatically
turns on and off the amplier when the OEM radio turns on and off (available
on Speaker-In only).
5. Power supply stage featuring multiple winding transformer, Low-ESR 105°C
capacitors, D-Class 2 Ω stable.
6. 5 ch / 3 ch operation mode (selectable), to realize a ve-channel system
(with sub), or a powerful sub + front three-channel system.
7. Versatile front and rear lters, providing the ability to realize Hi-Pass front +
rear system or multichannel woofer + tweeter system, both including sub.
8. Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
9. Selectable full range front + rear power outputs.
10. 24 dB continuously adjustable (50 to 500 Hz) Lo-Pass subwoofer lter.
11. SUBSONIC lter (24 dB - 25 Hz), removes very low subsonic frequencies
from music signal to avoid damages to the subwoofer.
12. Optional Remote Volume Control (HRC) allows the user to adjust subwoofer
level from dashboard.
HCP 4
760 W
MAX POWER
HCP 2
400 W
MAX POWER
HCP 1D
1400 W
MAX POWER
HCP 5D
1500 W
MAX POWER
FIVE CHANNEL D-CLASS AMPLIFIER WITH
CROSSOVER
HCP 4D
1160 W
MAX POWER
MONO D-CLASS AMPLIFIER WITH CROSSOVER
STEREO AMPLIFIER WITH CROSSOVER
FOUR CHANNEL AMPLIFIER WITH CROSSOVER
FOUR CHANNEL D-CLASS AMPLIFIER WITH
CROSSOVER
HRC
OPTIONAL