Specification Sheet

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_17.A
5
www.hertzaudiovideo.com
1. ADC (ADVANCED D-CLASS TECHNOLOGY) ensures hi-end acoustic response
with unmatched power efficiency;
2. Thermally optimized double extruded heat sink featuring die-cast aluminium
ergonomic terminals;
3. Stable at 1Ω to drive safely Mille subwoofers;
4. Optional HRC BM for subwoofer volume control;
5. 24 dB/Oct. continuously adjustable (40 to 150Hz) Lo-Pass filters and
24dB/Oct. subsonic filter (18 to 40Hz);
6. Variable phase control with 0–180°continuity to optimize low frequencies;
7. ML Power IN with balanced Speaker In inputs for an increased noise rejection
and RCA In;
8. Operating status real time monitoring through 4 LEDs ;
9. Pre-out full range outputs also available with Speaker In inputs;
10. ART™ (Automatic Remote Turn On-Off).
ML POWER 1
D-CLASS MONO AMPLIFIER
1000 W
FILTER CONFIG.
POWER SUPPLY
Power supply voltage: 11÷15 VDC
Idling current: 2 A
Idling current when off: 0.04 mA
Consumption @ 1Ω, 14.4 VDC (Max Musical Power): 83.5 A
OTHER FUNCTIONS
Remote In: 4 ÷ 15 VDC - 1 mA
ART
TM
: Automatic Remote Turn-On/Off with Speaker-In
Fuse: 3 x 40 A
INPUTS / FILTERS
Inputs: Pre IN / Speaker IN
Outputs: Pre OUT
Filters: Lo-pass 40 ÷ 150 Hz @ 24 dB/Oct.
Phase: (continuous adjustment) 0 ÷ 180°
Subsonic: Hi-pass 18 ÷ 40 Hz @ 24 dB/Oct.
Remote SUB Volume: (-50 ÷ 6) dB
SIZE / WEIGHT
Max size (mm/inches):
170 x 349 x 46.70
6.69” x 13.74” x 1.84”
Weight (kg/lb): 3.09 / 6.81
AMPLIFIER STAGE
Distorsion - THD (100 Hz @ 4Ω): 0.08 %
Bandwidth (-3 dB): 18 ÷ 150 Hz
S/N Ratio (A weighted @ 1 V): 105 dB
Damping factor (100 Hz @ 4Ω): 100
Pre-In sensitivity: 0.2 ÷ 5 V RMS
Pre-In impedance: 15 kΩ
Speaker-In sensitivity: 0.8 ÷ 20 V RMS
Speaker-In impedance: 470 Ω
Load impedance:
1 Ch 4 ÷ 1Ω
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:
1 Ch
1 Ch
1 Ch
600 W x 1 (4Ω)
1000 W x 1 (2Ω)
1000 W x 1 (1Ω)
CEA 2006-A RATINGS
RMS Power (4 Ω, ≤ 1 %
THD+N, 14.4 V):
600 W x 1Ch
S/N Ratio (ref. 1 W output): 83,5 dBA
HRC BM (optional)