ML Power ADVANCED WEB MANUAL ML Power 5 rev 1.0 The User Manual is also available from our web site www.hertzaudiovideo.com www.hertzaudiovideo.
ML Power 5 Advanced Web Manual EN Index 1. INTRODUCTION 2. PACKAGE CONTENTS 3. SAFE SOUND 4. GENERAL PRECAUTIONS 5. INSTALLATION AND SIZE 6. BATTERY / REMOTE CONNECTION AND HOW TO REPLACE THE FUSE 7. AUTO TURN-ON WITH HI-LEVEL INPUTS 8. TOP PANEL CONTROLS: SWITCHES AND ADJUSTMENT 9. FRONT AND REAR PANELS 10.
ML Power 5 Advanced Web Manual EN 1 INTRODUCTION Thank you for purchasing a Hertz product, designed according to the highest quality standards. Your ML Power amplifier is a cutting-edge product of compact size, providing high power and quality of sound. It will definitely ensure you maximum satisfaction by taking up very small room in your vehicle.
ML Power 5 Advanced Web Manual EN 3. SAFE SOUND HERTZ AMPLIFIERS CAN BE PART OF A HIGH POWER AUDIO SYSTEM THAT CAN GENERATE VERY HIGH UNDISTORTED SOUND PRESSURE LEVELS. PLEASE REMEMBER THAT LONG EXPOSURE TO AN EXCESSIVELY HIGH SOUND PRESSURE LEVEL MAY DAMAGE YOUR HEARING; THEREFORE, PLEASE USE COMMON SENSE AND PRACTICE SAFE SOUND. Safety must be at the forefront while driving.
ML Power 5 Advanced Web Manual EN 4. GENERAL PRECAUTIONS • This symbol indicates that you have to pay attention to these instructions. Disregarding them might cause accidental harms or damage your amplifier. • Before installing the amplifier, make sure you carefully read and understand all instructions. • The vehicle electric system must have 12V DC voltage with negative to ground. Make sure your car has it in order to avoid any damages to your amplifier and to the vehicle.
ML Power 5 Advanced Web Manual EN 5. INSTALLATION AND SIZES ML Power 5 B A D C E 6 A B C D 349 332 170 148 46,7 mm 6.69 5.83 1.84 in. 13.74 13.
ML Power 5 Advanced Web Manual 6. BATTERY / REMOTE CONNECTION AND HOW TO REPLACE THE FUSE 2 x 40 A BLADE FUSES 2 x 40 A BLADE FUSES GND GND SD +BATTERY SD +BATTERY REMOTE OUT Apply a Fuse close to positive pole to protect Apply +BATTERY wire a Fuse REMOTE OUT close to positive pole to protect +BATTERY wire 7.
ML Power 5 Advanced Web Manual EN 8. TOP PANEL CONTROLS: SWITCHES AND ADJUSTMENT CONTROLS 1 2 3 4 5 7 8 9 10 11 6 14 12 13 15 1 B CH LEVELS: B channels input sensitivity adjustment connectors. Select HI for Hi-pass to drive a WOOFER. Select BAND for bandpass to drive a WOOFER or a MIDRANGE. control. Set to 1 position. Use a CD as source, increase head unit volume until output distorts, then increase volume by 1 step in order to eliminate distortion.
ML Power 5 Advanced Web Manual EN 9. FRONT AND REAR PANELS 1 4 2 11 3 5 6 7 12 13 14 8 9 10 15 16 17 18 19 1 A PRE-IN: Left and Right pre-amplified inputs to drive 11 PROTECTION FUSE: 2 x 40A. A channels. Connect to pre-amplified source output. Signal can be 0.2 to 5V RMS. 12 POWER (+ BATT): Terminal block for the amplifier 11 ÷ 15 V DC power supply positive pole connection. Insert here the battery positive cable. The plug accepts cables up to 2 A.W.G.
ML Power 5 Advanced Web Manual 10. CONFIGURATION DIAGRAMS HOW TO USE REMOTE VOLUME CONTROL OPTIONAL SUBWOOFER REMOTE VOLUME CONTROL HRC BM + - SUBWOOFER N. A.
ML Power 5 EN Advanced Web Manual FRONT + REAR + SUB WITH REMOTE VOLUME CONTROL OPTIONAL R SD SUBWOOFER REMOTE VOLUME CONTROL L FRONT SOURCE + HRC BM + + - - L - R REAR R REAR FRONT + + - - SUBWOOFER FRONT N. A.
ML Power 5 EN Advanced Web Manual WOOFER AND MID/HI AND SUB R R L L SD FRONT SOURCE + L - + + - - R MID/HI SUBWOOFER WOOFER + R - MID/HI + - SUBWOOFER WOOFER N. A.
ML Power 5 EN Advanced Web Manual PRE-IN FRONT AND PRE-IN SUB R R L L R R L L SD FRONT REAR SOURCE + + + R - - - FRONT TWEETER WOOFER + + SUBWOOFER - TWEETER - SUBWOOFER WOOFER N. A.
ML Power 5 Advanced Web Manual PRE-IN FRONT, PRE-IN REAR AND PRE-IN SUB R R R L L REAR L R L SD FRONT R SUB L SOURCE + L - + + - - REAR SUBWOOFER R REAR R WOOFER + + - - SUBWOOFER FRONT N. A.
ML Power 5 Advanced Web Manual HI-IN FRONT INPUTS WITH FRONT, REAR AND SUB OUTPUTS L SPEAKER WIRE R SD SOURCE + L - + + - - REAR SUBWOOFER R REAR R FRONT + + - - SUBWOOFER FRONT N. A.
ML Power 5 Advanced Web Manual HI-IN FRONT AND REAR SPEAKER WIRE REAR R L L SPEAKER WIRE R FRONT SD SOURCE + L - + + - - REAR SUBWOOFER R REAR R FRONT + + - - SUBWOOFER FRONT N. A.
ML Power 5 Advanced Web Manual PRE-IN FRONT AND HI-IN REAR SPEAKER WIRE REAR R R R L L SPEAKER WIRE FRONT L SD SOURCE SOURCE + L - + + - - REAR SUBWOOFER R REAR R FRONT + + - - SUBWOOFER FRONT N. A.
ML Power 5 Advanced Web Manual 3CH MODE: FRONT AND SUB R R L L SPEAKER WIRE FRONT SD SOURCE SOURCE + L + + L - SUBWOOFER R FRONT SUBWOOFER FRONT N. A.
ML Power 5 Advanced Web Manual EN 11. CABLES Connection cables For maximum performance, always use new, good quality cables; their outer jacket must not be spoiled, and the copper must not show oxidation. For proper operation, always consider the length of the connection, the load and the current it has to handle. Connection products are the most flexible and complete; they are designed and built in order to get the best out of every installation, especially when used with Hertz amplifiers.
SUB PRE-IN (0.2-5V) B PRE-IN (0.2-5V) A PRE-IN (0.2-5V) REMOTE CONTROL SUB Vol. SUB HI-IN (0.8-20V) B HI-IN (0.8-20V) A HI-IN (0.8-20V) R R L L 47K - lin MIN - MAX 0 dB RCA prot RCA prot RCA prot R L R L R L B MIX B INPUT A = B INPUT B = A INPUT A S1 MIX S3 A = SUB INPUT B = A+B INPUT SUB INPUT A B P3 SUB LEVEL 5V – 300mV P2 B LEVEL 5V – 300mV P1 A LEVEL 5V – 300mV REMOTE CONTROL SUB VOL A B S6 P6 P7 24dB/Oct. LO-PASS 40-150 Hz 12dB/Oct. HI-PASS 80 - 3.
ML Power 5 Advanced Web Manual 13. TECHNICAL SPECIFICATIONS Power Supply Power supply voltage / fuse: 11÷15 VDC Idling current: 3A Idling current when OFF: 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 50 A Remote In: 4 ÷ 15 VDC - 1 mA ART TM: Automatic Remote Turn-On/Off with Speaker-In Fuse: 2 x 40 A Amplifier Stage Distorsion - THD (100 Hz @ 4Ω): 0.
All Specifications Subject to Change Without Notice
