Manual

Multi-Purpose Lock

Installation Instructions

ASSA ABLOY, the global leader

in door opening solutions

Product Components

SOLENOID VOLTAGE 12VDC 24VDC

ELECTRICAL RATINGS

FOR SOLENOID

CONTINUOUS DUTY

12VDC

24VDC

192

Resistance in Ohms

Amps Seated

Electrical Specifications

Operating Voltage +/- 10%

Watts Seated

STANDARD

INTERMITTENT DUTY

PRELOAD

250mA 125mA

12VDC

24VDC

67.8

8.4 8.4

700mA 350mA

MINIMUM WIRE GAUGE REQUIREMENTS

200 feet or less

200 - 300 feet

300 - 400 feet

14 gauge

12 gauge

18 gauge

16 gauge

Hook Bracket Assembly

660 Multi-Purpose Lock Body

Lock Mounting Brackets

#6-32 X 3/16” Screws

#10 X 1/2” Screws

#8-32 X 5/8” Screw

HES, Inc.

Phoenix, AZ 85044

800-626-7590

www.hesinnovations.com

PAGE 1
® HES, Inc. Phoenix, AZ 85044 800-626-7590 www.hesinnovations.
PAGE 2
Installation Directions 2 CAUTION! Before connecting any device at the installation site, verify input voltage using a multimeter. Many power supplies and low voltage transformers operate at higher levels than listed. Any input voltage exceeding 10% of the solenoid rating may cause severe damage to the unit and will void the warranty. WARNING: The Multi-Purpose Lock Body must be wired to a power source prior to insertion of the Hook Bracket Assembly.
PAGE 3
Installation Directions 3 Align dotted line with outer edge of cabinet. Tape Model 660 Mounting Template to inside surface of cabinet. Drill four 1/16” holes through paper template.
PAGE 4
Installation Directions 4 DIAGRAM 5: HOOK BRACKET INSTALLATION 7/16” 1/16” Left hand config shown 1-11/16” Inside surface of Cabinet Inside surface of cabinet DIAGRAM 6: FINAL LOCKDOWN DIAGRAM 7: OPTIONAL KEY OVERRIDE X=1/4” + R1 Y= 2-1/8” + R1 Y 2-1/8” + R1 PADDLE: 660 KO OPTION R1 (2) #10 X 1/2” SCREWS FOR FINAL LOCKDOWN MOUNTED TO DOOR/DRAWER X 1/4” + R1 DIAGRAM 8: DIMENSIONS 1/8” [3.8] 3/16” [5] 1” [25.3] 1” [25.4] 1-7/8” [46.9] 1-11/16” [43.1] 1-11/16” [43.1] 3-3/8” [85.