User's Manual

4.1 Installation Notice
Installation Guide4
Supply the detector as required (DC 7~12 V).
Provide good heat dissipation to the laser.
Pay attention to static electricity. Please release the body static electricity or wear antistatic bracelet before the installation.
Do not weld/replace any component unless it is recognized by Hesai.
Do not unplug the laser fiber. Do not bend the fiber even at a small angle.
Do not attempt to remove any circuit boards unless it is recognized by Hesai.
Do not use the PCB of detector A on detector B.
Do not disassemble or repair the device on your own accord. For repairs and maintenance inquiries, please contact an authorized Hesai
Technologies service personnel.
It is recommended that the length of the external cable should not exceed 3m.
1)
2)
3)
4)
5)
6)
7)
8)
9）
Prior to installing the detector, please read the notes carefully to ensure safe and appropriate usage:
-04-